{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
TDKT 1505PDR, IC808, Type: ST900
Article no.: 2027075
Catalog no.: 226560
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Series | HELI3MILL | |
| Wet maximum | suitable | |
| Manufacturer’s designation | HM390 TDKT 1505PDR IC808 | |
| Dry machining | suitable | |
| Oil | suitable | |
| Air | suitable | |
| Base form | triangular | |
| Insert width | 13 mm | |
| Blade thickness | 5.56 mm | |
| Insert length | 16.71 mm | |
| Insert version | neutral | |
| Cutting edge length | 13 mm | |
| Insert diameter | 15 mm | |
| Corner radius | 0.8 mm | |
| Corner angle | 60 degrees | |
| Normal clearance angle (main cutting edge) | 15 degrees | |
| ISO-Code | TDKT 1505PDR | |
| Tool material | Carbide | |
| Machining group | K (cast iron); M (stainless steel); N (non-ferrous metals); P (steel) | |
| Tool application group | P25-M25 | |
| Coating | PVD | |
| Insert thickness | 5.56 mm | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Number of teeth | 3 pcs. | |
| Direction of action | neutral | |
| Suitable for material | cast iron (K); non-ferrous materials (N); stainless steel (M); steel (P) | |
| Machining method | shoulder milling (FEC) | |
| Finishing / roughing assignment | Finishing; Roughing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | sharp-edged (F) | |
| Cutting conditions | continuous | |
| Number of potential uses | 3 pcs. | |
| Content | 1 pcs. | |
| Correction factor fz | 1.5 |
Identification & Classification
| Article number | 2027075 | |
| Catalog number | 226560 | |
| EAN / GTIN | 2000001105122 | |
| Manufacturer number | 5607506 |
Application Table
P
300
P
280
P
260
P
240
P
220
Description
Version:
Trigon indexable insert with 3 helical cutting edges. Axial and radial positive cutting edge design. For effective and precise machining of 90° shoulders.
Note:
Standard application values for ae = 0.3 to 1 × D / ap max = 13.0 mm.
The minimum order quantity corresponds to one pack unit quantity (VPE) or a multiple thereof.
The minimum order quantity corresponds to one pack unit quantity (VPE) or a multiple thereof.