{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Expertise in dowel and anchor technology
Technical reports and important publications for planners and engineers
Benefit from the expertise of our specialists in anchor and tie technology! On this page we provide structural engineers, engineers and planners with the latest technical reports, white papers and other useful publications.
The informative technical information in our new catalogue will help you to complete your work even more quickly and easily. Planners and users alike benefit from technical specifications, installation instructions and useful product information.
Design software - fischer FiXperience
The fischer FiXperience design software supports you as a planner, structural engineer and craftsman safely and reliably when designing your anchorages. FiXperience has a modular structure and can be used for a wide range of applications. With the help of the user-friendly individual programmes, anchorages and fixings can be designed and dimensioned easily and flexibly.
Design aid - FIS EM Plus with anchor rod FIS A/RG M
Tensile and shear loads of single anchors with one component edge and one centre distance under static and quasi-static, seismic and fire loads for anchor rods of sizes M 8 to M 56 according to NORM EN1992-4.
Design aid - FIS EM Plus Rebar
Tensile and shear loads of single anchors with one component edge and one centre distance under static and quasi-static, seismic and fire actions for reinforcing steel B500B, stainless reinforcing steel and concrete-concrete shear connectors of sizes Ø 10 to Ø 40 according to NORM EN1992-4.
Design aid - FIS SB with anchor rod FIS A/RG M
Tensile and shear loads of single anchors with one component edge and one centre distance under static and quasi-static, seismic and fire loads for anchor rods of sizes M 8 to M 30 according to NORM EN1992-4.
Design aid - FIS SB Rebar
Tensile and shear loads of single anchors with one component edge and one centre distance under static and quasi-static, seismic and fire loads for reinforcing steel B500B and concrete-concrete shear connectors of sizes Ø 10 to Ø 32 according to NORM EN1992-4.
Design aid - FAZ II Plus bolt anchors
Tensile and shear loads of single anchors with one component edge and one centre distance under static and quasi-static, seismic and fire loads for FAZ II Plus M 6 to M 24 bolt anchors in accordance with EN1992-4.
Design aid - Concrete screw FBS II
Tensile and shear loads of single anchors with one component edge and one centre distance under static and quasi-static, seismic and fire loads for concrete screw FBS II 6 to 14 according to NORM EN1992-4.
Technical Information – Gluing in wood
fischer FIS EM Plus epoxy resin mortar for use in glued-laminated and laminated beams made of spruce (Picea abies), fir (Abies alba), or pine (Pinus sylvestris) can be used to create high-performance and attractive wood-to-wood, wood-to-concrete, and wood-to-steel joints. Technical information with tensile and shear loads
Whitepaper - Significance of the new standard DIN EN1992-4
The standard DIN EN1992-4, published in spring 2019, comprehensively regulates the design of fixings in concrete as Part 4 of Eurocode 2. It replaces a large number of old guidelines and technical bulletins. DIN EN1992-4 reflects the current state of the art and increases both safety and transparency for users when designing anchors. Find out everything you need to know in the fischer whitepaper.
Design aid - subsequent reinforcement connections
Reinforcing bars that are installed with fischer injection mortars in accordance with the European Technical Assessment exceed the bond strength of bars set in concrete. In Switzerland, the design is therefore carried out in the same way as for bars set in concrete in accordance with EN 1992-1-1. You have a choice of three systems for post-installed reinforcement connections. Use the enclosed design aid to find the ideal system for your application.
Design aid - Repair and strengthening of concrete structures
The loads on concrete structures have steadily increased in recent years. Increasing traffic volumes, heavier vehicles, environmental conditions and ageing have meant that many concrete structures will have to be refurbished in the coming years. The concrete-concrete shear connectors FCC were developed to monolithically connect a concrete topping to an existing concrete supporting structure. The enclosed brochure provides detailed information on the various systems and loads.
CAD data
Planners and designers will find both 2D and 3D data for standard and branded products from our standard range in the Cadenas eCatalogue solution. The data can be downloaded in various data formats such as STP, DWG or DXF and transferred to your PLM or ERP system.
As a reliable partner, we offer you support in the product area as well as expertise and innovation. Product-specific tender texts are available to download free of charge. You can download the documents free of charge in all common file formats (HTML, GAEB 90 and XML, DOC, XLS, RTF, PDF, DATANORM, ÖNORM and text) and integrate them directly into your tendering software.