{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
SUMOCHAM drilling head FCP k7, IC908, ⌀ DC: 24,5mm
Article no.: 2026503
Catalog no.: 231790
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Series | SUMOCHAM | |
| Manufacturer’s designation | FCP 245 IC908 | |
| Cutter diameter min. | 24.5 mm | |
| Configurable | no | |
| Number of teeth | 2 | |
| Point angle | 140 degrees | |
| Insert thickness | 9.7 mm | |
| For base body size | 24 mm | |
| Tool material | Carbide | |
| Machining group | K (cast iron); M (stainless steel); P (steel) | |
| Tool application group | FCP | |
| Cutting media, manufacturer’s designation | IC908 | |
| Coating | TiAlN | |
| Grade | IC908 | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Gauge length | 10.86 mm | |
| Functional length | 9 mm | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Machining method | drilling into solid material | |
| Type of product | cutter insert for boring | |
| Content | single part |
Identification & Classification
| Article number | 2026503 | |
| Catalog number | 231790 | |
| EAN / GTIN | 7291075298864 | |
| Manufacturer number | 5509984 |
Application Table
P
100
P
90
P
100
P
70
P
55
H
35
H
35
H
70
H
60
M
50
M
50
S
35
K
120
N
155
Description
Version:
Vee ground drilling head for precise positioning and stable seating. Angled, radial stop surfaces for a significant increase in clamping force due to the cutting forces acting during machining. For productive drilling with high feed rates.
FCP
Main application ISO P and ISO K, secondary application ISO M. Flat head geometry with centring point. Advantageous for radial displacement and oblique material exit.
FCP
Main application ISO P and ISO K, secondary application ISO M. Flat head geometry with centring point. Advantageous for radial displacement and oblique material exit.
Note:
Cutting data applies for the base body 5×D. Drill pilot holes exclusively with drilling head of the same type – in particular for drilling heads FCP and QCP-2M. Please observe the application instructions for the base body. Cutting tolerance of the inserts: k7 (positive toleranced cutting edge diameter).
Designation convention: [type] [⌀ DC]-[addition] [cutting material]
Examples:
No. 231740 6.5 ICP 065 IC908
No. 231742 18.5 ICP 185-2M IC908
No. 231745 18.5 HCP 185-IQ IC908
Designation convention: [type] [⌀ DC]-[addition] [cutting material]
Examples:
No. 231740 6.5 ICP 065 IC908
No. 231742 18.5 ICP 185-2M IC908
No. 231745 18.5 HCP 185-IQ IC908