{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Digital adjustable snap gauge (passameter) 3903, Measuring range: 4-8mm
Article no.: 210782
Catalog no.: 424925
Article code:
New product
- IP Index of Protection: IP 65
Product details
Technical Data
| Scale divisions | 0.1 µm | |
| Contact point travel | 4 mm | |
| Measuring range | 4 mm - 8 mm | |
| Parallelism of the measuring faces | 0.6 µm | |
| Flatness of measuring faces | 0.3 µm | |
| Gauging force | 0.7 N - 2 N | |
| Measuring face ⌀ | 4.8 mm | |
| IP Index of Protection | IP 65 | |
| Measurement technology | digital | |
| Type of product | External micrometer |
Identification & Classification
| Article number | 210782 | |
| Catalog number | 424925 | |
| EAN / GTIN | 2050002079670 | |
| Manufacturer number | 76 390 300 220 | |
| Manufacturer/responsible person | Feinmess Suhl GmbH, Pfütschbergstraße 11, 98527 Suhl, Germany, www.feinmess-suhl.com |
Description
Version:
High-precision hand measuring tool with inductive measuring system, adjustable with gauge blocks. Sturdy measuring tool body. Hand temperature protection. The stable precision lapped anvil can be adjusted using a fine-pitch screw. Adjustable centring back-stop for setting component centre. Easy-to-read display can be rotated. Optional data module for capturing the measured values and recording them on the computer.
For checking small, intricate components.
For checking small, intricate components.
- Low gauging force of 0.7 / 1.3 / 2.0 N (not adjustable, please state when ordering).
- Small gauging faces from 4.8 mm.
Advantage:
- Very high measurement accuracy and repetition accuracy.
- High repetition accuracy due to constant gauging force.
- Stable measuring results thanks to hand temperature protection.
- Flexible, for use on the machine or in the measuring room.
- Adjustable tolerance mode with scale display and visual signal for good/ reject measurements facilitates use for series production measurements.
- Switchable temperature sensor.
Function:
IP65: Protected against jets of water from all directions and protected against penetration by dust (dust-tight), also completely protected against touching.
Application:
High-precision measurement of components. Series inspection of turned and milled parts – visualised tolerance mode.
Optional extras:
The optional FMS-S01 software offers the capability to configure the digital passameter by a cable directly from a PC. This allows functions such as calibration, LED functions and colours, bar displays, measuring modes and password protection to be activated and set.