{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
KLEBERIT 605.0 D2 Klebstoff 1K-STP 750 g
Article no.: 2146936
Catalog no.: 98051
Article code:
Product details
Technical Data
| Content | 750 g | |
| Stress group (DIN EN 204) | D2 | |
| Open time | ca 8 Minuten | |
| Pack | Bottle | |
| Colour | beige | |
| Base | STP-Hybrid | |
| Processing temperature | +5°C bis +30°C | |
| Application range | inside + outside |
Identification & Classification
| Article number | 2146936 | |
| Catalog number | 98051 | |
| EAN / GTIN | 4027616029368 | |
| Manufacturer number | 605.0.2081 |
Description
Advantage:
- Fast and bubble-free curing
- Adhesion to painted surfaces, many plastics and metals even without sanding
- Paintable
- Processable from +5 °C to 30 °C
- No warping of the carrier board with one-sided coating
- No pressing pressure is required for straight joining surfaces. Stack pressure is sufficient
- No water content, therefore no swelling of the glue joints with e.g. MDF
- Very economical
- No foam formation
- Combines the advantages of film, lacquer and PUR glues
Application Area:
- Manufacture of wall elements and other non-load-bearing structures made of wood and wood-based materials
- Surface bonding of different materials such as: mineral building boards, ceramic materials, concrete materials, rigid foams, wood, glass, metals and many plastics
Application Notes:
The glue can be applied to the substrates using a brush, roller, notched trowel or nozzle system. It is sufficient to apply adhesive to one side of the less porous joining part.
No pressing pressure is required for the cross-linking process. The parts to be joined may only need to be fixed in place. Protect the pressing surfaces from leaking adhesive by applying silicone paper.
Further processing of the glued parts is possible after approx. 1-2 hours, final strength is achieved after approx. 24 hours.
No pressing pressure is required for the cross-linking process. The parts to be joined may only need to be fixed in place. Protect the pressing surfaces from leaking adhesive by applying silicone paper.
Further processing of the glued parts is possible after approx. 1-2 hours, final strength is achieved after approx. 24 hours.