{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Pull stud sealed, form A, with bore, suitable for steep tapers: 30
Article no.: 2159910
Catalog no.: 308613
Article code:
New product
- Pull stud standard: ISO 7388-3
Product details
Technical Data
| suitable for steep tapers | 30 | |
| Hole characteristics | with bore | |
| Pull stud standard | ISO 7388-3 | |
| Collar ⌀ D | 17 mm | |
| Head ⌀ D1 | 13 mm | |
| Overall length L | 44 mm | |
| L1 | 24 mm | |
| Thread M | M12 | |
| Angle A | 15 degrees | |
| maximum tightening torque | 20 Nm | |
| suitable for taper arbors with colour code | SK 30 | |
| Type of product | Pull stud |
Identification & Classification
| Article number | 2159910 | |
| Catalog number | 308613 | |
| EAN / GTIN | 4069515028752 | |
| Manufacturer number | 308613 30 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Description:
The toolholder is securely pulled into the spindle by the spindle’s clamping gripper using the pull stud. Pull studs come in different versions. They are an important link between the machine and tool. Stringent requirements apply for the accuracy, strength and reliability of pull studs.
Application:
- For tools with taper shanks see also DIN 69871 and JIS B 6339 (MAS-BT).
- In machining centres (machines with automatic tool changers).
- In NC machines (machines without automatic tool changers).
Note:
Sealed − with O-ring.
When installing the pull stud, cheque the correct tightening torque.
ISO 7388-3 meets the old standard DIN 69872.
When installing the pull stud, cheque the correct tightening torque.
ISO 7388-3 meets the old standard DIN 69872.