{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Solid carbide milling cutter, Diamond, ⌀ h10 DC: 6mm
Article no.: 480958
Catalog no.: 209515
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Tolerance nominal ⌀: h10
- No. of teeth Z: 4
- Direction of infeed: horizontal and oblique
Product details
Technical Data
| Cutting edge ⌀ DC | 6 mm | |
| Coating | Diamond | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Tolerance nominal ⌀ | h10 | |
| No. of teeth Z | 4 | |
| Direction of infeed | horizontal and oblique | |
| Cutting width ae for milling operation | 0.5×D for side milling | |
| Shank | DIN 6535 HA with h6 | |
| Through-coolant | no | |
| Flute length Lc | 16 mm | |
| Cutting section dragging LA | 8 mm | |
| Overall length L | 58 mm | |
| Shank ⌀ Ds | 6 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for side milling in GRP CRP | 0.06 mm | |
| Colour ring | black | |
| Type of product | End / face mill |
Identification & Classification
| Article number | 480958 | |
| Catalog number | 209515 | |
| EAN / GTIN | 4045197467065 | |
| Manufacturer number | 209515 6 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
200
N
190
N
170
N
150
N
180
N
160
N
350
N
190
N
190
N
340
N
Description
Version:
Twisted and curved cutting edges, which enable burr-free milling of both the upper and lower edges of fibre-reinforced composites.
Delamination is prevented because the cutter performs a cut which is simultaneously dragging and compacting. The cutter must be positioned centrally to the cross section of the material.
Delamination is prevented because the cutter performs a cut which is simultaneously dragging and compacting. The cutter must be positioned centrally to the cross section of the material.