{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Alternative article:
-
Article no.: 670410
Solid carbide milling cutter with chip separators TPC, TiAlN, ⌀ f8 DC: 8mm
Article no.: 625536
Catalog no.: 203091
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: f8
- No. of teeth Z: 5
Product details
Technical Data
| Cutting edge ⌀ DC | 8 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | f8 | |
| No. of teeth Z | 5 | |
| Helix angle | 40 degrees | |
| Helix angle characteristic | unequal spacing | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal and oblique | |
| Cutting width ae for milling operation | 0.03×D | |
| Shank | DIN 6535 HB to h6 | |
| Balance quality with shank | G 2.5 with HB | |
| Through-coolant | no | |
| Machining strategy | TPC | |
| Flute length Lc | 40 mm | |
| Overall length L | 81 mm | |
| Shank ⌀ Ds | 8 mm | |
| Corner chamfer width at 45° | 0.16 mm | |
| Corner chamfer angle | 45 degrees | |
| Average chip thickness hmax for TPC milling in Toolox 44 HRC | 0.03 mm | |
| Colour ring | green | |
| Type of product | End / face mill |
Identification & Classification
| Article number | 625536 | |
| Catalog number | 203091 | |
| EAN / GTIN | 4045197814401 | |
| Manufacturer number | 203091 8 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
350
P
310
P
270
P
200
P
120
H
50
H
30
H
20
M
190
M
120
Description
Version:
High-performance end mills for general-purpose machining, specially designed for TPC applications.
Strengthened core. Offset chip breaker. Optimised bending strength due to the use of ultra-fine grain substrates.
Strengthened core. Offset chip breaker. Optimised bending strength due to the use of ultra-fine grain substrates.
Note:
hmax: The values stated in the table are maximum values.
ae max = 0.03×D for TPC machining.
ae max = 0.03×D for TPC machining.