{{ name }}
Réf. {{ combinedCodeWithHighlight }}
Référence:
EAN / GTIN:
Réf. fabricant:
N° cat.:
Vis à béton à tête cylindrique bombée 4x50 FBS P
Réf.: 2219676
N° de catalogue.: 3328
Référence:
Détails du produit
Caractéristiques techniques
| Ø | 9,3 mm | |
| Professionnel / Bricolage | Professionnel | |
| d0 | 4 mm | |
| h1 | 60 mm | |
| Environnement | Inside | |
| Conditions d’application | Intérieur | |
| matériel | Acier électrozingué | |
| Taille de l’embout (TX) | 25 | |
| h2 | 60 mm | |
| Protection de surface | galvanisé/électrogalvanisé | |
| Emballage | Boite à bec verseur | |
| Forme de tête | Tête demi-ronde | |
| l | 50 mm |
Packaging units
| 1 Paquet | 200 pièces |
Identification et classification
| Référence article | 2219676 | |
| Numéro de catalogue | 3328 | |
| EAN / GTIN | 2000001184226 | |
| Réf. fabricant | 579371 | |
| Catégorie d'articles | RMC |
Description
Avantage(s):
- Quick and easy assembly and disassembly using a cordless screwdriver, tangential impact wrench or manual installation.
- The recommended loads for cracked and uncracked concrete make the application more secure.
- The concrete screw FBS 4/5 offer the possibility for use in masonry, like solid sand-lime bricks, for a flexible use in different substrates.
- Two embedment depths enable high flexibility for example for plaster bridging and a precise adaption.
- Fire resistant values according R120 enable the use in case of fire.
- The sawtooth geometry enables fast cutting into the base material.
- The expansion-free anchorage system (undercut) enables low edge and axial spacings.
- The concrete screw in diameter 4/5 is ideal for the installation of cable routing, surface-mounted sockets or in general non-safety-related applications that require relatively little load.
Champ d'application:
- Eletrical installations
- sanitary, heating and air conditioning installations
- Surface-mounted sockets
- Cable Clamp
- Cable trays
- Channel systems
- Wall cabinet
- Picture frames
Recommended loads for:
- Concrete starting at C20/25, cracked and non-cracked
- Masonry with out of solid building materials with a dense structure, such as solid sand-lime bricks
Notes d'application:
- Drill hole cleaning is necessary.
- The concrete screw FBS 4 and 5 P is recommended for the push-through installation.
- We recommend using a tangential impact screwdriver with a suitable impact screwdriver socket, or a cordless screwdriver or manual installation by hand.
- The screw is installed correctly when the screw head sits flush on the fixture and cannot be screwed in deeper (visual setting control).