{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Fine stoneware drill /tiles drill, ⌀: 5mm
Article no.: 638519
Catalog no.: 787035
Article code:
- Tool material: Carbide
- Use with impact / without impact: not for impact drilling
- maximum speed: 200
Product details
Technical Data
| ⌀ | 5 mm | |
| Number of drills | 2 | |
| Tool material | Carbide | |
| Use with impact / without impact | not for impact drilling | |
| Shank | Plain shank | |
| Bit hexagon shank | E 6,3 | |
| Overall length | 105 mm | |
| Shank ⌀ | 10 | |
| maximum speed | 200 min-1 | |
| Type of product | Masonry drill |
Identification & Classification
| Article number | 638519 | |
| Catalog number | 787035 | |
| EAN / GTIN | 9002741169054 | |
| Manufacturer number | 0000300052100 | |
| Manufacturer/responsible person | ALPEN-MAYKESTAG GmbH, Urstein Nord 67, 5412 PUCH BEI HALLEIN, Austria, www.alpenmaykestag.com |
Description
Version:
2 pieces. A drill with a diamond-ground carbide tip with a patented centring tip for highly accurate start positioning and exact holes without break-outs. With 10 mm shank. A carbide drill for use in standard drill chucks. With 1/4 inch (E 6.3) hexagon shank.
Application:
For very hard stoneware tiles up to Mohs / scratch hardness class 9 and for glass and porcelain.
Note:
Not suitable for hammer drills. Maximum spindle speed 200 rpm. No cooling required.