{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Smooth rolling tool EG45-40M universal, Shank mounting type: S25
Article no.: 646241
Catalog no.: 291520
Article code:
- Cutting direction: Left-hand and right-hand
Product details
Technical Data
| Shank mounting type | S25 | |
| Cutting direction | Left-hand and right-hand | |
| Overhang LA | 130 mm | |
| Tip centre offset f | 101.1 mm | |
| maximum rolling force | 4 kN | |
| Roll ⌀ | 40 mm | |
| Shank square | 25×25 mm | |
| Type of product | Smooth rolling tool |
Identification & Classification
| Article number | 646241 | |
| Catalog number | 291520 | |
| EAN / GTIN | 4060491000176 | |
| Manufacturer number | EG45-1-40M-R02.50-SL25 | |
| Manufacturer/responsible person | ECOROLL AG Werkzeugtechnik, Hans-Heinrich-Warnke-Straße 8, 29227 - CELLE, Germany, www.ecoroll.de |
Description
Version:
For use on CNC and conventional lathes.
With symmetrical structure – can be used universally as right-hand or left-hand version.
With symmetrical structure – can be used universally as right-hand or left-hand version.
Advantage:
Surface quality Rz < 1 µm possible.
Feed rates up to 1 mm/rev possible (external machining).
Consistent results due to continuous measurement of the rolling force.
Feed rates up to 1 mm/rev possible (external machining).
Consistent results due to continuous measurement of the rolling force.
Application:
For mechanical surface finishing.
For machining all metallic materials up to a tensile strength of 1400 N/mm2 and a hardness of up to 45 HRC.
For machining all metallic materials up to a tensile strength of 1400 N/mm2 and a hardness of up to 45 HRC.
Suitable for:
⌀ range (recommended): from 35 mm
Recommendation:
For external surfaces with subsequent radius up to plane surface.
Note:
- Other shank connections on request.
- Detailed technology recommendations can be found in the instruction manual.
Roller radius = 2.5 mm. Machinable workpiece radii from 4 mm to 12 mm.