{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
SlimLine revolving lathe centre 60°/30°, Morse taper: 3
Article no.: 702987
Catalog no.: 320643
Article code:
Product details
Technical Data
| Morse taper | MT3 | |
| Body ⌀ D | 30 mm | |
| Overall length L | 149 mm | |
| Reach B | 68 mm | |
| largest centre point ⌀ 60° A | 7 mm | |
| largest centre point ⌀ 30° A | 14 mm | |
| maximum radial run-out | 0.005 mm | |
| Centre point length C | 24 mm | |
| maximum speed | 5,000 min-1 | |
| for workpiece weight | 1,000 kg | |
| Version | With draw-off nut | |
| Type of product | Centring drill |
Identification & Classification
| Article number | 702987 | |
| Catalog number | 320643 | |
| EAN / GTIN | 4062406127275 | |
| Manufacturer number | 320643 3 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
- Precision version with additional stiffness in the bearings.
- Precision roller bearings for high concentricity.
- Maintenance-free due to lifetime lubrication.
- Special seal prevents ingress of dirt and coolant.
- MT shank hardened and ground.
- With extended centre, point angle 60° / 30°.
- With push-off thread and push-off nut.
- outstandingly suitable for cutting threads and splining.
Description:
Lathe centres are mainly used on lathes to support long and slim workpieces, since with these workpieces there would otherwise be a risk of the workpiece bending or moving around as a result of the forces generated.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
Advantage:
Push-off nut can be removed forwards thus eliminating any obstruction to the machining process.
Application:
Machining small and very small parts such as thread machining with optimum access to the flat face.
Supplied with:
Including draw-off nut.