{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
”4 in 1” drilling and turning tool 2.25×D, right-hand, ⌀ DC: 10mm
Article no.: 724054
Catalog no.: 268408
Article code:
- Through-coolant: yes
Product details
Technical Data
| Series | “4 in 1” | |
| Nominal ⌀ D | 10 mm | |
| Application type | right-hand | |
| Through-coolant | yes | |
| Overhang LA | 29 mm | |
| Shank length Ls | 42 mm | |
| Reach L1 | 22.5 mm | |
| Shank ⌀ Ds | 12 mm | |
| ⌀ d2 | 16 mm | |
| suitable indexable insert | ZCMX 05.. | |
| Set of insert screws | 269028 40 (IP6; 0.6 Nm) | |
| Type of product | Boring bar |
Identification & Classification
| Article number | 724054 | |
| Catalog number | 268408 | |
| EAN / GTIN | 4062406272944 | |
| Manufacturer number | 268408 10 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
Plain shank with collar.
Application:
1. Facing of end faces.
2. Drilling (drilling out and drilling from solid) – flat drilled hole end.
3. Internal longitudinal turning.
4. External longitudinal turning.
2. Drilling (drilling out and drilling from solid) – flat drilled hole end.
3. Internal longitudinal turning.
4. External longitudinal turning.
Note:
- Choose corner radii and toolholder size as large as possible.
- Drilling tolerance + 0.15 mm (for drilling processes with a driven tool).
- When drilling greater than nominal ⌀, residual material will remain.
- Always use internal cooling for drilling (at least 5 bar).