{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Carbide tipped jobber drill, uncoated, ⌀ DC h8: 9mm
Article no.: 242147
Catalog no.: 121150
Article code:
- Tool material: Carbide K20
- Standard: DIN 8037
- Tolerance nominal ⌀: h8
- Number of cutting edges Z: 2
- Point angle: 118
Product details
Technical Data
| Nominal ⌀ DC | 9 mm | |
| Coating | uncoated | |
| Tool material | Carbide K20 | |
| Standard | DIN 8037 | |
| Tolerance nominal ⌀ | h8 | |
| Number of cutting edges Z | 2 | |
| Point angle | 118 degrees | |
| recommended maximum drilling depth L2 | 36.5 mm | |
| Shank | Plain shank with driver according to DIN1809 | |
| Through-coolant | no | |
| Flute length Lc | 50 mm | |
| Overall length L | 90 mm | |
| Shank ⌀ Ds | 9 mm | |
| Feed f in steel < 1100 N/mm2 | 0.13 mm/rev. | |
| Colour ring | without | |
| Type of product | Jobber drill |
Identification & Classification
| Article number | 242147 | |
| Catalog number | 121150 | |
| EAN / GTIN | 4045197471451 | |
| Manufacturer number | 121150 9 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
140
P
70
P
70
P
60
P
40
P
25
K
90
N
140
Description
Version:
With carbide cutting tip. Ground between centres.
Shank with driver tang for use in clamping collets.
Shank with driver tang for use in clamping collets.
Note:
Flute length LC = L2 + 1.5 × DC.