{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Value pack solid carbide milling cutter with chip separators TPC, 5 pieces
Article no.: 196816
Catalog no.: GG3085
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: e8
- No. of teeth Z: 4
Product details
Technical Data
| Cutting edge ⌀ DC | 6 mm | |
| Coating | TiSiN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 4 | |
| Helix angle | 40 degrees | |
| Helix angle characteristic | unequal spacing | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal and oblique | |
| Cutting width ae for milling operation | 0.18×D | |
| Shank | DIN 6535 HB to h6 | |
| Balance quality with shank | G 2.5 with HB | |
| Through-coolant | no | |
| Machining strategy | TPC | |
| Flute length Lc | 18 mm | |
| Overhang length L1 incl. recess | 25 mm | |
| Recess ⌀ D1 | 5.8 mm | |
| Overall length L | 62 mm | |
| Shank ⌀ Ds | 6 mm | |
| Corner chamfer width at 45° | 0.12 mm | |
| Corner chamfer angle | 45 degrees | |
| Average chip thickness hmax for TPC milling in steel < 900 N/mm2 | 0.058 mm | |
| Colour ring | green | |
| Contents | 5 | |
| Type of product | End / face mill |
Identification & Classification
| Article number | 196816 | |
| Catalog number | GG3085 | |
| EAN / GTIN | 4062406625764 | |
| Manufacturer number | GG3085 6 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
360
P
330
P
290
P
220
P
140
M
180
M
150
Description
Version:
High-performance end mill for general-purpose applications, specially designed for TPC applications.
Strengthened core.
Optimised bending strength due to the use of ultra-fine grain substrates.
Chip breaker for controlled chip breaking.
Same as No. 203085.
Strengthened core.
Optimised bending strength due to the use of ultra-fine grain substrates.
Chip breaker for controlled chip breaking.
Same as No. 203085.
Note:
hmax: The values stated in the table are maximum values.
ae max = 0.18×D for TPC machining.
ae max = 0.18×D for TPC machining.