{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
GESIPA Blind rivet screw eFastening, with bottom toothing / zinc plated blue
Article no.: 1711505
Catalog no.: 9881
Article code:
Product details
Technical Data
| Drill-Ø | 6.1 mm | |
| L | 11 mm | |
| Material | Steel | |
| Tensile force | 6.03 kg | |
| Head shape | Flat round head | |
| Shear strength | 5.16 N | |
| k | 0.95 mm | |
| D2 | 9 mm | |
| Clamping length | 0.25 mm - 3 mm | |
| D1 | 6 mm |
Identification & Classification
| Article number | 1711505 | |
| Catalog number | 9881 | |
| EAN / GTIN | 4007081109536 | |
| Manufacturer number | 1711505 |
Description
Description:
GESIPA® e-Fastening - Bringing the system into the system
Advantage:
The advantages of the Polygrip cabinet rivet:
- No rivet mandrel protrusion after setting and therefore no cable damage when pulling in
- Hole covered by large head K11.4
- Residual mandrel locking
- Suitable for large drill holes, up to 5.2 mm
- Large clamping range: 3.3-9 mm
- Insulating coating
- Suitable for visual inspection thanks to black surface
The advantages of the blind rivet screw earthing/protective conductor connection
- Quick installation
- High flexibility
- No damage to surrounding surfaces
- Fulfils the requirements of DIN EN 62208
- Very low contact resistance (< 0.35 mOhm)
- Also available in small quantities
- No rivet mandrel protrusion after setting and therefore no cable damage when pulling in
- Hole covered by large head K11.4
- Residual mandrel locking
- Suitable for large drill holes, up to 5.2 mm
- Large clamping range: 3.3-9 mm
- Insulating coating
- Suitable for visual inspection thanks to black surface
The advantages of the blind rivet screw earthing/protective conductor connection
- Quick installation
- High flexibility
- No damage to surrounding surfaces
- Fulfils the requirements of DIN EN 62208
- Very low contact resistance (< 0.35 mOhm)
- Also available in small quantities
Note:
Brings the system into the system. GESIPA® riveting technology offers simple and secure solutions for stress-free connections. Everything from a single source! Process engineering systems, machine tools or production facilities require a control cabinet and a control panel if the associated electrical and electronic components cannot be accommodated in the machine itself.
Switch cabinets vary in size, weight and design, and there are standard models and customised versions. To equip all control cabinets, cable ducts and profile rails must first be installed in accordance with standard EN 60204-1,
Safety of machinery.
In practice, this results in the following requirements:
- Cables must not be damaged
- Large head of the connector to cover slotted holes
- High load capacity
- No loose residues, chips or residual mandrels
- Large drill hole tolerance
- Connector must insulate
Switch cabinets vary in size, weight and design, and there are standard models and customised versions. To equip all control cabinets, cable ducts and profile rails must first be installed in accordance with standard EN 60204-1,
Safety of machinery.
In practice, this results in the following requirements:
- Cables must not be damaged
- Large head of the connector to cover slotted holes
- High load capacity
- No loose residues, chips or residual mandrels
- Large drill hole tolerance
- Connector must insulate