{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Measuring instrument for magnetic field strengths, Type: 3873
Article no.: 192524
Catalog no.: 496970
Article code:
Click to enlarge image
Click to enlarge image
Application example:Tangential field measurement using the 90° contact point for field flow rates
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Product details
Technical Data
| Measuring range | ±80.000 A/m | |
| Error limit | ±10±2% (DC) ±50±4% (AC) A/m | |
| Length | 133 mm | |
| Width | 81 mm | |
| Height | 32 mm | |
| Weight | 0.23 kg | |
| Type of product | Field strength measuring instrument |
Identification & Classification
| Article number | 192524 | |
| Catalog number | 496970 | |
| EAN / GTIN | 2050002080768 | |
| Manufacturer number | 3873.001 | |
| Manufacturer/responsible person | Karl Deutsch Prüf- und Messgerätebau GmbH & Co. KG, Otto-Hausmann-Ring 101, 42115 WUPPERTAL, Germany, www.karldeutsch.de |
Description
Version:
Measurement device for convenient and practical field strength measurement. For magnetic powder crack detection workpieces are magnetised by a current or field passing through them. For reliable detection of cracks a certain minimum magnetising field must be achieved. After the test the workpiece is usually demagnetised.
Thanks to its user-friendly operation and robust rubberised protective frame the DEUTROMETER is suitable for rough everyday conditions of testing. The DEUTROMETER measures magnetic fields, both constant and low-frequency alternating. Both the magnetising field strength and also the residual field strength are measured directly after each other.
Measurement properties:
Thanks to its user-friendly operation and robust rubberised protective frame the DEUTROMETER is suitable for rough everyday conditions of testing. The DEUTROMETER measures magnetic fields, both constant and low-frequency alternating. Both the magnetising field strength and also the residual field strength are measured directly after each other.
- Large illuminated display
- Constant fields / alternating fields are detected automatically. This eliminates false measurements due to incorrect setting of the instrument.
- The selected unit of measurement is shown directly in the display.
- Visual and acoustic warnings if the limit value is exceeded, allowing quick checking of workpieces
- Simultaneous display of the measured value and maximum value
- Selectable measurement modes: Standard display or bar chart display for visual limit value checking
- No calibration is necessary
- Satisfies the requirements of EN ISO 9934-3:2002 chapter 9.3
- Suitable for inspection tasks to EN ISO 17638 chapter 5.5.2
Measurement properties:
- Measurement variables: magnetic field strength H or induction B (in air)
- Measurement units: mT, A/cm, kA/m, Gauss
- Measurement methods: DC = measurement of a constant field that does not vary over time, with assignment of a + or - as the leading sign of the magnetic field AC = effective value in an alternating field (true RMS)
- Measurement constant field / alternating field (automatic detection)
- Measurement constant field / alternating field (automatic detection with limit value monitoring)
- Constant field measurement (e.g. for residual fields)
- Alternating field measurement (e.g. measurement of the magnetising intensity)
Supplied with:
Incl. transport case and test certificate
Optional extras:
Measuring probes No. 496972, zero field chamber and reference magnet with defined field strength