{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Alternative article:
-
Article no.: 2124904
Surftest surface roughness measuring instrument, Type: SJ411
Article no.: 119617
Catalog no.: 499219
Article code:
Product details
Technical Data
| Manufacturer’s designation | Surftest SJ411 | |
| Packaging | plastic case | |
| Power supply | mains-powered | |
| Min. measuring range | 0 mm | |
| Max. measuring range | 800 mm | |
| Display unit | yes | |
| Feed unit | yes | |
| Operation | manual | |
| Measurement travel for longitudinal sensing | 25 mm | |
| Roughness standards | ANSI; DIN EN ISO; JIS; MOTIF; VDA | |
| Recorded profiles | R-Motif; W-Motif; primary profile (P); roughness profile (R); waviness profile (W) | |
| Analysis graphic | ADC; BAC; profile R (roughness profile) | |
| Cut-off (λc) | 0.08 mm; 0.25 mm; 0.8 mm; 2.5 mm; 25 mm; 8 mm | |
| Straightness deviation | 0.3 µm | |
| Scanning speed | 0.05 mm/s; 0.1 mm/s; 0.2 mm/s; 0.5 mm/s; 1 mm/s | |
| Contact point radius | 2 | |
| With printer | yes | |
| Tastsystemausführung | mit Kufe; ohne Kufe / Freitastsystem | |
| Type of product | surface roughness measuring device | |
| Overall length | 200 mm | |
| Overall width | 150 mm | |
| Overall height | 100 mm | |
| Standard | DIN EN ISO 16610-21 | |
| Test certificate | yes | |
| Min. measuring force | 0 N | |
| Max. measuring force | 0.001 N | |
| Interface | Digimatic; RS232C; SD card | |
| With display | yes | |
| Display diagonal | 5.7 in | |
| Display type | LCD | |
| Storage of measured values | yes | |
| Can be calibrated | yes |
Identification & Classification
| Article number | 119617 | |
| Catalog number | 499219 | |
| EAN / GTIN | 4946368849607 | |
| Manufacturer number | 178-580-11D | |
| Manufacturer/responsible person | Mitutoyo Deutschland GmbH, Borsigstraße 8-10, 41469 Neuss, Germany, www.mitutoyo.de |
Description
Version:
Transportable cordless reference level system with dust-protected, touch-sensitive operating screen, and integral printer.
- Very easy intuitive menu-guided controls with clear presentation of measured results and profiles on a 5.7 inch colour display.
- Optional measuring with free scanning system or scanning rail.
- Measurement of roughness, ripple and primary profile.
- Statistics function and colour-coded tolerance evaluation.
- Large number of internationally recognised parameters to DIN EN ISO, VDA, JIS, ANSI, and MOTIF, and 16 integral languages.
- Phase correction Gauss filter to DIN EN ISO 16610-21 (supersedes DIN EN ISO 11562).
- Compensation function for radii and inclinations.
- DAT function: Digital inclination wizard for aligning the feed unit position.
- Two different calculations can be performed based on just a single measurement.
- Quick output and documentation of measurement results, graphics and measurement conditions on the integral printer.
- Easy archiving of measured data on an SD memory card.
- The calibration values can be saved and recalled using five different buttons.
Application:
- Measurement of deep slots.
- Measurement with probe facing upwards.
- Cylinder measurement with a support foot.
- Measuring the surface roughness of cylinders transversely to the cylinder’s axis.
- Measurement with measuring stand and levelling table.
Supplied with:
Including feed unit with standard contact point, 5 rolls of thermal paper No. 499050, mains adapter, calibration standard, user manual, and storage case.
Optional extras:
Note:
Free-of-charge analysis software available on request. Only available in Germany and Austria!