SFS MC1 Screw T25 Special fastener MC1-S100-T25-4.5x100

TORX (from the English word ‘torque’) is the registered word mark for a screw drive profile, the standard designation for which is ‘internal six-lobe’ (English: ‘six lobe, internal socket’). With the six-lobe internal socket, the screw and tool are subjected to less radial stress than with the traditional internal hexagon, and consequently suffer less damage. Torque is transmitted more directly via the radial parts of the tooth flanks rather than via the faces of the hexagon.

Steel is an iron-carbon alloy with a maximum carbon content of 2% by mass. The steels achieve their intended physical and mechanical properties through various hardening, annealing and tempering processes. It is also possible to harden the edge zone by surface hardening, case hardening or nitriding. Well-known steel grades are structural steels, free-machining steels, case-hardening steels, nitriding steels, tempering steels, tool steels and stainless steels.

Blue galvanised finishes are produced either by electroplating in accordance with DIN EN ISO 4042 or by mechanical plating in accordance with DIN EN ISO 12683. For fasteners with a hardness exceeding 390 HV, there is a risk of hydrogen embrittlement during galvanising (electrolytic process). This necessitates specific measures (such as annealing), although these do not provide a 100 per cent guarantee against embrittlement.

The special surface stands for high corrosion resistance and guarantees long-lasting protection against corrosive environmental influences. Durocoat® 480 corresponds to a corrosion resistance of 480 hours in the salt spray test according to DIN EN ISO 9227.