{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
GARANT Master Tap machine tap for wire thread inserts HSS-E-PM, AlTiX, EG-M: EG-M2
Article no.: 126708
Catalog no.: 133560
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Wet maximum | suitable | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Interface coding | ZYL00282105 | |
| Holder shape | smooth shank with square drive | |
| Holder version | metric | |
| Holder size, metric | 2,8 mm | |
| Holder tolerance class | h9 | |
| Shank diameter DS | 2.8 mm | |
| Length of shank LS | 36 mm | |
| Oil | suitable | |
| Cooling lubricant | yes | |
| Series | Master Tap | |
| Thread type | EG-M | |
| Nominal diameter of metric thread D | 2 mm | |
| Thread D | EG-M2x0,4 | |
| Thread pitch | 0.4 mm | |
| Thread tolerance class | 6HX mod. | |
| Chisel edge diameter | 2.02 mm | |
| Length of tapping part Lc | 9 mm | |
| Tap infeed length | 1.6 mm | |
| Taper lead angle | 8 degrees | |
| Number of teeth | 3 | |
| Twist direction | neutral, straight | |
| Type of thread-cutting tool | machine tap for dynamic machining | |
| Taper lead form | B | |
| Cutting part version | with lubrication groove and dirt trap groove | |
| Application for type of drilling | through hole | |
| To depth (x diameter) | 3 | |
| Number of clamping slots | 3 | |
| Core hole diameter | 2.15 mm | |
| Core hole diameter guideline value | 2.15 mm | |
| Flank angle | 60 degrees | |
| Reinforced shank | yes | |
| Square-drive width across flats □ | 2.1 mm | |
| Normlänge L | 50 mm | |
| Tool material | HSS-E-PM | |
| Machining group | K (cast iron); M (stainless steel); N (non-ferrous metals); P (steel) | |
| Cutting media, manufacturer’s designation | HSS-E-PM | |
| Coating | AlTiX | |
| Interface | joint 1 | |
| Usable length L1 | 6 mm | |
| Overall length L | 51.01 mm | |
| Cutting direction | right-hand cutting | |
| Tool version | solid steel | |
| Standard | DIN 40435 | |
| Data carriers | without data carrier | |
| Machining method | thread processing internal (EGI) | |
| Colour ring | green | |
| Type of product | taps | |
| Content | single part |
Identification & Classification
| Article number | 126708 | |
| Catalog number | 133560 | |
| EAN / GTIN | 4062406207205 | |
| Manufacturer number | 133560 EG-M2 | |
| Article class | 11I | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
30
N
35
N
20
P
30
P
30
P
25
P
12
P
8
M
10
M
8
K
20
N
20
Description
Version:
Tap to DIN 40435 (similar to DIN 371 / DIN 376).
GARANT Master Tap Universal taps, designed for use in a wide spectrum of materials with high process reliability.
GARANT Master Tap Universal taps, designed for use in a wide spectrum of materials with high process reliability.
- HSS-E-PM tool material for maximum wear resistance.
- Reduced coefficient of friction due to the new high-performance coating.
- Special geometry for optimum swarf evacuation.
Application:
For production of EG mounting thread according to metric ISO thread DIN 8140 for STI wire thread inserts (Screw Thread Insert).
Note:
Please ensure without fail the correct tapping drill ⌀ (see table)!