{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Anchors for metric screws M 10 S
Article no.: 128839
Catalog no.: 4867
Article code:
Product details
Technical Data
| Hardened | No | |
| Suitable for wood | No | |
| Suitable for perforated brick | Yes | |
| Suitable for calcium silicate brick | Yes | |
| d0 | 14 mm | |
| Suitable for solid brick | Yes | |
| Material | Nylon | |
| Material grade | Nylon | |
| Building material | Solid building material | |
| t | 90 mm | |
| Suitable for natural stone | Yes | |
| Suitable for aerated concrete | Yes | |
| Suitable for plasterboard | Yes | |
| Colour | grey | |
| M | M10 | |
| Suitable for concrete | Yes | |
| Suitable for aerated concrete | Yes | |
| h0 | 90 mm | |
| With edge | No | |
| Professional / DIY | Profi | |
| Suitable for chipboard | No | |
| Surface protection | Other | |
| Packing | Folding box | |
| l | 70 mm | |
| Typ | M 10 S |
Packaging units
| 1 Pack | 20 Pieces | |
| 1 Pallet | 16800 Pieces |
Identification & Classification
| Article number | 128839 | |
| Catalog number | 4867 | |
| EAN / GTIN | 4006209501542 | |
| Manufacturer number | 50154 | |
| Article class | RME |
Description
Advantage:
- The internal geometry of the M-S allows for the use of standard metric screws or threaded rods for the ideal adaptation to suit the intended use.
- The rimless plug sleeve allows for the plug to be set as deep as required below the plaster to the bearing substrate to achieve the maximum load-bearing capacity.
- As the plug only expands in two directions, it is possible to direct the expansion forces so that they run parallel to the edge of the building material by turning the plug. This allows for smaller edge distances.
- The slimline plug geometry makes it easy to push the plug into the drill hole, for a fast and simple installation.
Application Notes:
- The M-S is suitable for pre-positioned and push-through installation.
- When turning in the screw, the M-S expands in two directions, thus providing a secure anchoring in the building material.
- The required screw length is given by: Plug length + plaster and/or insulation layer thickness + fixture thickness + 1 x screw diameter.
- Suitable for metric screws and threaded bolts.
- Chamfer the thread to make it easier to screw in screws and threaded rods.