{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
ZYKON undercut anchor FZA 10 x 40 M6/10
Article no.: 154585
Catalog no.: 8492
Article code:
Product details
Technical Data
| Material grade sleeve | Other | |
| Number of nuts | 1 | |
| Material | Galvanised steel | |
| Associated setting tool | FZE 10 plus | |
| Suitable for hollow-core concrete slab | No | |
| Fixing with expansion tool | Yes | |
| Drive | Hexagonal | |
| Suitable for cracked concrete | Yes | |
| Usable length | 10 mm | |
| Suitable for non-cracked concrete | Yes | |
| Professional / DIY | Profi | |
| With collar | No | |
| Environment | Inside | |
| Sleeve material | Steel | |
| Number of washers | 1 | |
| Surface protection | Galvanic/electrolytic zinc plated | |
| Packing | Folding box | |
| Anchoring depth | 40 mm | |
| Max. thickness of the attachment | 10 mm | |
| Surface protection sleeve | Galvanic/electrolytic zinc plated | |
| Test marks / approvals | DIBt approval |
Packaging units
| 1 Pack | 25 Pieces | |
| 1 Pallet | 3600 Pieces |
Identification & Classification
| Article number | 154585 | |
| Catalog number | 8492 | |
| EAN / GTIN | 4006209607121 | |
| Manufacturer number | 60712 | |
| Article class | RMC |
Description
Advantage:
- The special ZYKON undercut technology allows for a positive fit connection and ensures maximum safety, even in large cracks.
- The almost expansion-free installation of the anchor allows small edge distances and axial spacing, and thereby enables flexible use.
- The FZUB special drill allows for a fast installation by creating the undercut without having to change tools.
- The drill hole geometry allows for a very low setting energy, thus reducing the energy required for installation.
Application Area:
- Steelwork constructions
- Guard rails
- Consoles
- Machines
- Staircases
- Gates
- Façades
Approved for:
- Concrete C20/25 to C50/60, cracked and non-cracked
- Concrete C12/15
- Natural stone with dense structure
Application Notes:
- The FZA is suitable for pre-positioned installation.
- The undercut drill hole is created using the special FZUB drill.
- Once the anchor has been placed in the drill hole, the expansion sleeve is driven over the cone using the FZE Plus setting tool, and the undercut drill hole is filled with a positive fit.