{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Coltogum gun cleaner 500ml
Article no.: 163346
Article code:
Product details
Technical Data
| Content | 500 ml | |
| Pack | Can | |
| Colour | transparent | |
| Base | organic solvent | |
| Signal word | Danger | |
| Hazard warnings | H222 Extremely flammable aerosol.; H229 Pressurized container: may burst if heated; H319 Causes serious eye irritation.; H336 May cause drowsiness or dizziness.; EUH066: Repeated exposure may cause skin dryness or cracking |
Packaging units
| 1 Carton | 12 Pieces | |
| 1 Pallet | 432 Pieces |
Identification & Classification
| Article number | 163346 | |
| EAN / GTIN | 7610363021005 | |
| Article class | EAA |
Description
Description:
Especially for cleaning the Coltogum assembly foam gun. Can be used as a spray with a spray cap, increases the service life of the gun.
Application Area:
Removes fresh polyurethane foam from textiles, surfaces and the inside of the gun. Never clean the gun with water. Cured foam can no longer be cleaned. Coltogum® Foam and Gun Cleaner should always be available during foam processing
Application Notes:
Gun: Immediately after use, screw the assembly foam gun onto the coupling piece of the gun cleaner can as far as it will go (do not overtighten or tilt). Remove foam residues from the gun with a flush. Allow the cleaner to act for 1 - 2 minutes. Then allow the cleaner to flow out by pressing the trigger until it comes out clean. Repeat the process if necessary. Textiles: Apply Coltogum® Foam and Gun Cleaner directly to foam splashes. Carry out tests on an inconspicuous area before use and observe the technical data sheet and safety data sheet.