{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Burr GARANT Master Uni – medium, Carbide, Type: F0618
Article no.: 170502
Catalog no.: 540220
Article code:
Offers
Product details
Technical Data
| Through-coolant | no | |
| Cooling lubricant | yes | |
| Series | GARANT Master Uni | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Shank diameter DS | 6 mm | |
| Tool material | Carbide | |
| Machining group | M (stainless steel); N (non-ferrous metals); P (steel) | |
| Coating | uncoated | |
| Cutter diameter Dc | 6 mm | |
| Cutting edge length Lc | 18 mm | |
| Spacing of the cutters | unequal spacing | |
| Toothing grit designation | medium | |
| Interface | joint 1 | |
| Overall length L | 50 mm | |
| Tool version | solid carbide | |
| Type of product | burr | |
| Content | single part |
Identification & Classification
| Article number | 170502 | |
| Catalog number | 540220 | |
| EAN / GTIN | 4062406586508 | |
| Manufacturer number | 540220 F0618 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
Description
Version:
The newly developed innovative tooth geometry permits a high metal removal rate and at the same time extremely smooth running and very good guidance. The optimum chip formation (no pointed chips) achieves high surface quality in roughing and finishing applications.
Shank ⌀ 6 mm.
GARANT burrs are manufactured from high performance carbide grades with high wear-resistance and maximum cutting edge strength, using only the latest CNC machines. Steel shanks are used when the head diameter is larger than the shank diameter, otherwise they are made from solid carbide.
- High rate of material removal.
- Smooth running.
- Low thermal stress, long tool life, improved chip evacuation.
- For general-purpose use on steel, stainless steel, aluminium.
Shank ⌀ 6 mm.
GARANT burrs are manufactured from high performance carbide grades with high wear-resistance and maximum cutting edge strength, using only the latest CNC machines. Steel shanks are used when the head diameter is larger than the shank diameter, otherwise they are made from solid carbide.
Application:
Suitable for use with power tools and industrial robots, on almost all materials. For deburring, edge breaking, cleaning,
weld and surface preparation.
weld and surface preparation.
Note:
Materials with poor heat conductivity: Reduce speed in order to avoid overheating the burr and smearing.