{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
SFS isotak®Befestiger Durocoat BS-4,8x300
Article no.: 1747516
Catalog no.: 9481
Article code:
Product details
Technical Data
| L | 300 mm | |
| Drive | Hexalobular socket | |
| Material | Case hardened steel | |
| Surface | Durocoat | |
| Head shape | Lens head | |
| Typ | BS-4,8x300 | |
| D1 | 4.8 mm |
Identification & Classification
| Article number | 1747516 | |
| Catalog number | 9481 | |
| EAN / GTIN | 7611188403144 | |
| Manufacturer number | 1747516 |
Description
Advantage:
- Quick and easy mounting due to optimized drill tip
- High pull-out values with asymmetric fastening thread
- High-quality corrosion protection, environmentally friendly, free of chromium VI
- FM approved, with exceptionally high ratings
- Slip-resistant fastening solution
Technical Data:
Accessories for conventional cordless tools:
or recommended setting tool:
- Drive shaft ZA 1/4""-M6-300 or ZA 1/4""-M6-750
- Screw insert T25-32-M6 ring
- Holder ZH-12-ring
or recommended setting tool:
- Automatic setting tool isotak® IT260
- Commercial screwdriver with rechargeable battery
Note:
Use of the IT260 setting tool possible, but only if ordered pre-assembled and magazined.
Application Area:
The isotak® system is an economical, safe and simple solution for large roof structures. The system's performance is optimal, especially for very thick insulation. The combination of special fasteners and matching plastic grommets is convincing in terms of economy and settlement safety.
Fastening of roof waterproofing and insulation material to trapezoidal steel sheet. Material thickness of the trapezoidal steel sheet from 0,6 mm to 2x1,25 mm or 1x2,0 mm.
Setting depth: min. 20 mm
The fastener can be used for both trapezoidal steel sheet and wooden substructure. The thickness of the wooden substructure should be at least 18 mm, the setting depth should be at least 30 mm.
Fastening of roof waterproofing and insulation material to trapezoidal steel sheet. Material thickness of the trapezoidal steel sheet from 0,6 mm to 2x1,25 mm or 1x2,0 mm.
Setting depth: min. 20 mm
The fastener can be used for both trapezoidal steel sheet and wooden substructure. The thickness of the wooden substructure should be at least 18 mm, the setting depth should be at least 30 mm.
Application Notes:
The isotak® system is an economical, safe and simple solution for large roof structures. The system's performance is optimal, especially for very thick insulation. The combination of special fasteners and matching plastic grommets is convincing in terms of economy and settlement safety.
Fastening of roof waterproofing and insulation material to trapezoidal steel sheet. Material thickness of the trapezoidal steel sheet from .6mm to 2x1.25mm or 1x2.mm.
Setting depth: min. 2mm
The fastener can be used for both trapezoidal steel sheet and wooden substructure. The thickness of the wooden substructure should be at least 18mm, the setting depth should be at least 3mm.
Fastening of roof waterproofing and insulation material to trapezoidal steel sheet. Material thickness of the trapezoidal steel sheet from .6mm to 2x1.25mm or 1x2.mm.
Setting depth: min. 2mm
The fastener can be used for both trapezoidal steel sheet and wooden substructure. The thickness of the wooden substructure should be at least 18mm, the setting depth should be at least 3mm.