{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Pair of gloves MASTER CUT C OIL, Glove size: 6
Article no.: 174903
Catalog no.: 094418
Article code:
Product details
Technical Data
| Series | Master Cut | |
| Quality and test seal | Oeko-Tex® Standard 100 | |
| Contents pairs | 1 pair | |
| Cut protection class, EN 388 | C | |
| Version, EN 388 | EN388:2016 | |
| Resistance to abrasion | 4 | |
| Resistance to cuts (Coupe test) | X | |
| Tear propagation resistance | 4 | |
| Resistance to penetration | 2 | |
| Resistance to cuts (TDM) | C | |
| Impact protection | not defined | |
| Material of coating, the palms of the hands | Nitrile | |
| Material of coating, 3/4 coating | Nitrile | |
| EN 388 code | 4X42C | |
| Colour | grey; black | |
| Type of product | gloves | |
| Area of application | cut protection | |
| Glove size | 6 | |
| Accuracy of fit | fitting | |
| Scope of application | all-round; precision | |
| Reuse | reusable | |
| Unit | pair | |
| Knitted technology (fineness) | 18G | |
| Standard | EN 388; EN ISO 21420 | |
| Backing material | HPPE fibre | |
| Coating | 3/4 coating; the palms of the hands | |
| Lined | no | |
| Characteristics | DMF free; reinforced crook of the thumb | |
| Protection category | II | |
| Content | pair |
Identification & Classification
| Article number | 174903 | |
| Catalog number | 094418 | |
| EAN / GTIN | 4062406423230 | |
| Manufacturer number | 094418 6 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
GARANT Master Cut Oil cut-resistant gloves. Close-fitting and extremely comfortable thanks to 18-gauge knit. Pleasant nitrile micro-foam coating for exceptionally good sense of touch and high degree of dexterity. Therefore highly suitable for precise handling of sharp-edged parts. Also ideal for wet or oily environments thanks to 3/4 nitrile coating that extends over the knuckles. A second coating layer of sanded nitrile on the palm of the hand and fingers ensures a particularly secure grip. With reinforced thumb joint for longer working life.
Very flexible cut-resistant gloves with cut resistance level C. Well suited for oily working environments with high cut hazards, e.g. on cutting machines.
Very flexible cut-resistant gloves with cut resistance level C. Well suited for oily working environments with high cut hazards, e.g. on cutting machines.
Standard:
EN 388; EN ISO 21420
Note:
The minimum order quantity corresponds to one pack unit quantity (VPE) or a multiple thereof.
Warning:
Intended use
Reasonably foreseeable misuse
- Protect hands against mechanical risks, abrasions, blisters and cutting hazards.
- For precision work.
- Optimum protection is obtained only when the area to be protected is completely covered.
- Where gloves have fastenings, check that these are securely closed.
- Protective gloves must not be allowed to slip.
- Select a suitable glove size.
Reasonably foreseeable misuse
- Offer no protection against chemical, microbiological, thermal or electrical hazards.
- Do not wear when close to rotating machine parts.
- Do not continue using gloves following contact with sharp-edged items.
- Combination with other protective equipment must not impair the protective effect and must not hinder the wearer in his activities.