{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
GARANT Master Tap machine tap extra long HSS-E-PM Form C, AlTiX, G: G3/4
Article no.: 178360
Catalog no.: 137807
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Cooling lubricant | yes | |
| Series | Master Tap | |
| Interface position | on the machine | |
| Holder type | Plain shank | |
| Holder version | metric | |
| Holder size, metric | 20 mm | |
| Holder tolerance class | h9 | |
| Shank diameter | 20 mm | |
| Thread type | G | |
| Thread nominal diameter metric | 26.44 mm | |
| Thread | G3/4 | |
| Thread pitch | 1.814 mm | |
| Turns per inch | 14 | |
| Thread tolerance class | DIN-ISO 228/1 | |
| Length of tapping part | 66.1 mm | |
| Taper lead angle | 11.14 degrees | |
| Number of teeth | 2 | |
| Twist direction | right-hand | |
| Twist angle | 40 degrees | |
| Type of thread-cutting tool | machine tap for dynamic machining | |
| Taper lead form | C | |
| Application for type of drilling | Blind hole | |
| To depth (x diameter) | 2.5 | |
| Number of clamping slots | 2 | |
| Core hole diameter | 24.5 mm | |
| Flank angle | 55 degrees | |
| Square-drive width across flats | 16 mm | |
| Tool material | HSS-E-PM | |
| Cutting media, manufacturer’s designation | HSS-E-PM | |
| Coating | AlTiX | |
| Interface | joint 1 | |
| Overall length | 280 mm | |
| Cutting direction | right-hand cutting | |
| Standard | Werksnorm | |
| Machining method | thread processing internal | |
| Colour ring | green | |
| Type of product | Taps |
Identification & Classification
| Article number | 178360 | |
| Catalog number | 137807 | |
| EAN / GTIN | 4062406209162 | |
| Manufacturer number | 137807 G3/4 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
24
N
28
N
16
P
24
P
24
P
20
P
10
P
6
M
8
M
6
K
16
N
16
Description
Version:
Universal taps, designed for use in a wide spectrum of materials with high process reliability.
With extra long shank.
- HSS-E-PM tool material for a high degree of wear resistance.
- Reduced coefficient of friction due to the new high-performance coating.
- Special geometry for optimum swarf evacuation.
With extra long shank.
Advantage:
Designed for tapping threads where access is difficult.
Application:
For Whitworth parallel pipe threads DIN-ISO 228/1 (threads that do not form a seal within the connection).