{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling XNEX 080608, for indexable milling cutters, HB7525
Article no.: 181997
Catalog no.: 215185
Article code:
Offers
Product details
Technical Data
| Wet minimum | suitable only under restricted conditions | |
| Max. cutting depth ap | 1.5 mm; 4 mm | |
| Wet maximum | suitable only under restricted conditions | |
| Dry machining | suitable | |
| Air | suitable | |
| Cooling lubricant | yes | |
| Base form | triangular | |
| Thickness of insert S | 6.35 mm | |
| Diameter of insert d | 12.487 mm | |
| Corner radius R | 0.8 mm | |
| Normal clearance angle (main cutting edge) | 0 degrees | |
| Normal clearance angle, main cutting edge | 0 degrees | |
| ISO-Code | XNEX 080608 | |
| Attachment hole diameter | 4.6 mm | |
| Cutting depth ap, min. | 0.2 mm | |
| Cutting depth ap, max. | 4 mm | |
| Cutting depth in use | Full slot milling; Side milling | |
| Feed rate per tooth min. fz | 0.18 mm | |
| Tool material | Carbide | |
| Standard designation for cutting medium, 2nd Priority | HW-M25 | |
| Machining group | P (steel) | |
| Cutting media, manufacturer’s designation | HB7525 | |
| Coating | CVD | |
| Grade | HB7525 | |
| Insert thickness T | 7.92 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | XNEX 080608 | |
| Insert designation | XNEX 080608 | |
| Type of product | cutter insert | |
| With ISO code | yes | |
| Number of teeth | 6 pcs. | |
| Suitable for material | steel (P) | |
| Tolerance Class | E | |
| Machining method | shoulder milling (FEC) | |
| Type of fastening | hole | |
| Chip breaker | yes | |
| Cutter version | sharp-edged (F) | |
| Number of potential uses | 6 pcs. | |
| Content | single part | |
| Correction factor fz | 2.5 |
Packaging units
| 1 Carton | 10 pieces |
Identification & Classification
| Article number | 181997 | |
| Catalog number | 215185 | |
| EAN / GTIN | 4062406392246 | |
| Manufacturer number | 215185 ST900 | |
| Article class | 21A | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
335
P
300
P
280
Description
Version:
6 edges ensure good value for money, due to a low price per cutting edge.
Double-sided 2×3-edge carbide indexable insert for shoulder milling operations.
Double-sided 2×3-edge carbide indexable insert for shoulder milling operations.
Note:
Standard application values for ae = 0.3×D / ap = 3mm.