{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling SNHX 1205, for side milling cutters, Tungsten carbide, right-hand
Article no.: 182059
Catalog no.: 218615
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Dry machining | suitable | |
| Oil | suitable | |
| Air | suitable | |
| Base form | square | |
| Insert width | 12.7 mm | |
| Blade thickness | 5.4 mm | |
| Insert length | 13.36 mm | |
| Insert version | right-hand | |
| Cutting edge length | 12.7 mm | |
| Cutting edge height | 5.4 mm | |
| Insert diameter | 12.7 mm | |
| Corner radius | 3.5 mm | |
| Corner chamfer width | 0.25 mm | |
| Corner angle | 90 degrees | |
| Rake face chamfer width | 0 mm | |
| Rake face chamfer angle | 0 degrees | |
| Rake angle | 15 degrees | |
| Setting angle | 90 degrees | |
| Normal clearance angle (main cutting edge) | 0 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 0 degrees | |
| Normal clearance angle (flat cutting edge) | 0 degrees | |
| Cutting conditions | interrupted | |
| Cutting edge length, limited | 3.1 mm | |
| ISO-Code | SNHX 1205 | |
| Attachment hole diameter | 5.35 mm | |
| Tool material | Carbide | |
| Machining group | P (steel) | |
| Tool application group | P25 | |
| Cutting media, manufacturer’s designation | PTT35 | |
| Coating | AlTiN | |
| Grade | HB7835 | |
| Insert thickness | 5.4 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | SN1205024R | |
| Interface coding for insert according to ISO TS 13399-60 | SN1205024R | |
| Insert designation | SNHX 1205 | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 4 pcs. | |
| Direction of action | right-hand | |
| Suitable for material | steel (P) | |
| Tolerance Class | H | |
| Machining method | slot milling (FNU) | |
| Finishing / roughing assignment | Finishing; Roughing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | rounded (E) | |
| Number of potential uses | 1 pcs. | |
| Weight | 10 g | |
| Content | 1 pcs. | |
| Correction factor fz | 2.5 |
Identification & Classification
| Article number | 182059 | |
| Catalog number | 218615 | |
| EAN / GTIN | 4062406538118 | |
| Manufacturer number | 218615 UNI | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
180
P
170
P
160
M
110
M
90
Description
Note:
Standard application values for ae max.
To machine a flat slot base, left and right inserts must be mounted on the carrier. The side facing away from the shank is equipped with left inserts.
To machine a flat slot base, left and right inserts must be mounted on the carrier. The side facing away from the shank is equipped with left inserts.