{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling SNHX 1207, for side milling cutters, Tungsten carbide, left-hand
Article no.: 182060
Catalog no.: 218623
Article code:
Product details
Technical Data
| Manufacturer’s designation | SNHX 1207 | |
| Base form | square | |
| Thickness of insert S | 7 mm | |
| Length of cutting edge l | 12.7 mm | |
| Height of cutting edge | 7 mm | |
| Diameter of insert d | 12.7 mm | |
| Corner radius R | 3.5 mm | |
| Corner angle | 90 degrees | |
| Rake face chamfer width C | 0 mm | |
| Rake face chamfer angle | 0 degrees | |
| Rake angle | 15 degrees | |
| Setting angle | 90 degrees | |
| Normal clearance angle (main cutting edge) | 0 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 0 degrees | |
| Normal clearance angle (flat cutting edge) | 0 degrees | |
| Cutting conditions | interrupted | |
| Cutting edge length, limited | 3.1 mm | |
| ISO-Code | SNHX 1207 | |
| Attachment hole diameter | 5.35 mm | |
| Tool material | Carbide | |
| Machining group | P (steel) | |
| Cutting media, manufacturer’s designation | PTT35 | |
| Coating | AlTiN | |
| Grade | HB7835 | |
| Insert thickness T | 7 mm | |
| Type of product | cutter insert | |
| With ISO code | yes | |
| Number of teeth | 1 pcs. | |
| Direction of action | left-hand | |
| Suitable for material | steel (P) | |
| Tolerance Class | H | |
| Machining method | slot milling (FNU) | |
| Type of fastening | hole | |
| Chip breaker | yes | |
| Cutter version | rounded (E) | |
| Number of potential uses | 4 pcs. | |
| Weight | 14 g | |
| Correction factor fz | 2.5 |
Identification & Classification
| Article number | 182060 | |
| Catalog number | 218623 | |
| EAN / GTIN | 4062406537951 | |
| Manufacturer number | 218623 UNI | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
180
P
170
P
160
M
110
M
90
Description
Note:
Standard application values for ae max.
To machine a flat slot base, left and right inserts must be mounted on the carrier. The side facing away from the shank is equipped with left inserts.
To machine a flat slot base, left and right inserts must be mounted on the carrier. The side facing away from the shank is equipped with left inserts.