{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling TOMT 060508ER-SM, for indexable milling cutters, CA6535
Article no.: 182120
Catalog no.: 226445
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | TOMT 060508ER-SM | |
| Dry machining | suitable | |
| Oil | suitable | |
| Air | suitable | |
| Base form | triangular | |
| Wide insert B | 11.6 mm | |
| Thickness of the insert S | 5.7 mm | |
| Length of cutting insert L | 11.6 mm | |
| Insert version | right-hand | |
| Length of cutting edge l | 11.6 mm | |
| Height of cutting edge | 5.7 mm | |
| Diameter of the cutting insert d | 7.2 mm | |
| Corner radius R | 0.8 mm | |
| Corner angle | 60 degrees | |
| Rake face chamfer width C | 0 mm | |
| Rake face chamfer angle | 0 degrees | |
| Rake angle | 0 degrees | |
| Setting angle | 90 degrees | |
| Normal clearance angle (main cutting edge) | 0 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 0 degrees | |
| Normal clearance angle (flat cutting edge) | 0 degrees | |
| Cutting conditions | interrupted | |
| Cutting edge length, limited | 6 mm | |
| ISO-Code | TOMT 060508ER-SM | |
| Attachment hole diameter | 3.4 mm | |
| Type of chip breaker | SM | |
| Tool material | Carbide | |
| Standard designation for cutting medium, 2nd Priority | HC-S20 | |
| Standard designation for cutting medium, 3rd Priority | HC-M25 | |
| Machining group | M (stainless steel); S (difficult-to-machine materials) | |
| Tool application group | SM | |
| Cutting media, manufacturer’s designation | CA6535 | |
| Coating | CVD | |
| Grade | CA6535 | |
| Insert thickness T | 5.7 mm | |
| Type of fastening for insert | M (with cyl. hole clamped from above and via the hole) | |
| Interface coding for insert | TOMT 060508ER-SM | |
| Interface coding for insert according to ISO TS 13399-60 | TO1205083R | |
| Insert designation | TOMT 060508ER-SM | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 3 pcs. | |
| Direction of action | right-hand | |
| Suitable for material | heat-resistant super-alloys (S); stainless steel (M) | |
| Tolerance Class | M | |
| Machining method | shoulder milling (FEC) | |
| Finishing / roughing assignment | Finishing; Roughing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | rounded (E) | |
| Number of potential uses | 3 pcs. | |
| Weight | 2,900 g | |
| Content | 1 pcs. | |
| Correction factor fz | 2.5 |
Identification & Classification
| Article number | 182120 | |
| Catalog number | 226445 | |
| EAN / GTIN | 2050002059009 | |
| Manufacturer number | TMA40002 | |
| Manufacturer/responsible person | KYOCERA UNIMERCO Tooling GmbH, Hammfelddamm 6, 41460 Neuss, Germany, www.kyocera-unimerco.de |
Application Table
S
40
Description
Version:
Improved chip evacuation with unique chip breaker design for the indexable inserts. The maximum axial rake angle of 17° ensures low cutting forces.
Application:
The SM geometry is the 1st Choice for lower cutting forces.