{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for NC spotting drill, HB225, Type: 10
Article no.: 182126
Catalog no.: 231521
Article code:
Product details
Technical Data
| Wet maximum | suitable | |
| Dry machining | suitable only under restricted conditions | |
| Cooling lubricant | yes | |
| Base form | square | |
| Thickness of insert S | 2.38 mm | |
| Length of cutting edge l | 8.31 mm | |
| Height of cutting edge | 2.38 mm | |
| Diameter of insert d | 8.31 mm | |
| Corner radius R | 0.8 mm | |
| Corner angle | 90 degrees | |
| Rake face chamfer angle | 45 degrees | |
| ISO-Code | SOGT 080208 | |
| Attachment hole diameter | 3.55 mm | |
| Cutting depth ap, max. | 4 mm | |
| Vorschub pro Umdrehung min. f | 0.03 mm/rev. | |
| Vorschub pro Umdrehung max. f | 0.03 mm/rev. | |
| Tool material | Carbide | |
| Machining group | M (stainless steel); P (steel) | |
| Cutting media, manufacturer’s designation | HB225 | |
| Coating | AlCrN | |
| Grade | HB225 | |
| Insert thickness T | 2.38 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | S00802083N | |
| Interface coding for insert according to ISO TS 13399-60 | S00802083N | |
| Insert designation | SOGT 080208 | |
| Type of product | cutter insert | |
| With ISO code | yes | |
| Number of teeth | 4 pcs. | |
| Direction of action | neutral | |
| Suitable for material | stainless steel (M); steel (P) | |
| Tolerance Class | G | |
| Type of fastening | hole | |
| Chip breaker | yes | |
| Number of potential uses | 4 pcs. | |
| Content | single part |
Packaging units
| 1 Carton | 10 pieces |
Identification & Classification
| Article number | 182126 | |
| Catalog number | 231521 | |
| EAN / GTIN | 4062406565510 | |
| Manufacturer number | 231521 10 | |
| Article class | 21Y | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
150
P
140
P
130
P
130
P
120
M
90
M
80
Description
Application:
For NC spot drilling and chamfering. Also suitable for stationary use for face turning on the lathe. Not suitable for engraving.
Note:
ap = 4 mm, f = 0.03 mm.