{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
RotoRi jaw turning out ring set, Type: S
Article no.: 183607
Catalog no.: 315910
Article code:
Product details
Technical Data
| Type of product | twist-out ring | |
| Suitable for lathe chuck diameter min. | 80 mm | |
| Suitable for lathe chuck diameter max. | 200 mm | |
| Suitable for counterbore for outside jaws | M8 | |
| External clamping diameter min. | 39 mm | |
| External clamping diameter max. | 153 mm | |
| Internal clamping diameter min. | 25 mm | |
| Internal clamping diameter max. | 121 mm |
Identification & Classification
| Article number | 183607 | |
| Catalog number | 315910 | |
| EAN / GTIN | 2050002053113 | |
| Manufacturer number | P19508142200 | |
| Article class | 30N | |
| Manufacturer/responsible person | Antonio Basile GmbH, Lerchenstrasse 2, 74226 NORDHEIM, Germany, www.basilegmbh.de |
Description
Version:
The special patented design of the turning out rings with curved segments permits stepless adjustment of the jaws to achieve the required diameter. The patented flexible RotoFix clamping bolts in the set make it possible to compensate for the large counter-bore tolerances in the clamps of different manufacturers by means of a 2-mm adjustment range. No reworking of screw counterbores is necessary.
Advantage:
- Internal and external clamping with 1 ring.
- Stepless clamping range.
- 1/10 mm precise infeed of the rotating diameter.
- Reduced set-up costs thanks to RotoFix clamping studs.
- High cost saving with regard to clamping jaws.
- Optimum accessibility of the turning tool.
- Quick and flexible handling.
Application:
The rings made from high-strength special steel allow soft clamping jaws to be bored precisely under clamping pressure or hard clamping jaws to be ground. Can be used on internal or external machining of the jaws.
Supplied with:
20 rings and 3 bolts each M8 / M10.
Note:
On request also available for 4 and 6-jaw chucks.