{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Tapping chuck, ER synchro, HSK-A 63, for ER collet size: 16
Article no.: 183770
Catalog no.: 338195
Article code:
Product details
Technical Data
| Through-coolant | yes, with max. 50 bar | |
| Entry of cooling lubricant | with cooling lubricant entry, axially concentric | |
| Escape of cooling lubricant | with cooling lubricant exit, axially concentric | |
| Cooling lubricant | yes | |
| Holder type | hollow shank taper HSK | |
| Interface coding | HSK06300110 | |
| Holder shape | with internal centring | |
| Holder version | dimensionless nominal size with cooling | |
| Holder size, no dimensions | 63 | |
| Type of mounting | hole (internal mounting) | |
| Shank length | 0 mm | |
| Min. clamping diameter | 4 mm | |
| Max. clamping diameter | 12 mm | |
| Gauge length | 110 mm | |
| External diameter, tool-end | 34 mm | |
| Length compensation by compression | 0.5 mm | |
| Length compensation by tension | 0.5 mm | |
| Suitable for tapping | yes | |
| With cooling channel bore | yes | |
| Maximum coolant pressure | 50 bar | |
| Interface | joint 1; joint 2 | |
| Type of product | quick-change chuck | |
| Overall length | 142 mm | |
| Overall height | 34 mm | |
| Overall width | 34 mm | |
| Standard | DIN 69893 | |
| Through-coolant available | yes | |
| Material | heat-treatable steel | |
| Content | 1 pcs. |
Identification & Classification
| Article number | 183770 | |
| Catalog number | 338195 | |
| EAN / GTIN | 4062406511081 | |
| Manufacturer number | 338195 16 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
- With minimum length adjustment (MLA), by means of a damping element.
- Internal coolant supply up to 50 bar.
- Increases the tool life of taps/fluteless taps.
Application:
- On machining centres with synchronised spindles.
- For compensating the difference in pitch between tap and synchronised spindle.
- For compensating the pitch tolerances of taps.
Optional extras:
Note:
Do not degrease the synchro tapping chuck.
Do not clean the items with aggressive cleaners or in an ultrasonic bath. Rubber rings and seals may be damaged.
Do not clean the items with aggressive cleaners or in an ultrasonic bath. Rubber rings and seals may be damaged.