{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Radio 3D edge finder, digital, with contact point (⌀ 4 mm) XTOUCH, Spherical point ⌀: 4mm
Article no.: 183797
Catalog no.: 359450
Article code:
Product details
Technical Data
| Number of batteries contained | 1 pcs. | |
| Type of battery | lithium (Li) | |
| International size | button cell (CR2032) | |
| Series | Xtouch | |
| ESD protected area (EPA) | no | |
| EX area | no | |
| Power supply | battery-powered | |
| Overall length L | 134 mm | |
| Height H | 39 mm | |
| Width B | 67 mm | |
| Clamping shank diameter D3 | 16 mm | |
| Contact point diameter D1 | 4 mm | |
| With spherical point | yes | |
| Spherical point diameter D | 4 mm | |
| Casing length L2 | 82 mm | |
| Type of product | 3D probe |
Identification & Classification
| Article number | 183797 | |
| Catalog number | 359450 | |
| EAN / GTIN | 4062406370602 | |
| Manufacturer number | 359450 4 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
- Possibility to transfer the measured values in combination with GARANT Xconnect No. 359455 1.
- Suitable only for Siemens and Heidenhain controllers. The machine requires a functioning USB port on the control panel.
- High accuracy and linearity. For fully automatic determination of component zero-points, measurement of lengths, bore centres, reference edges and axial alignment.
- Convenient and simple concentricity adjustment.
- Large working range in all directions (x, y, z = 7 mm).
- Compact metal body.
- Dust-tight and watertight = IP67.
- Predetermined breaking point.
- Simple menu navigation.
- Quick commissioning without hardware changeover and service engineer use.
- No need to interfere with the machine tool operating system!
- Minimisation of rejects.
Function:
IP67: Protected against intermittent immersion in water and protected against penetration by dust (dust-tight), also completely protected against touching.
Application:
Automatic transmission of the measured values into the machine control by GARANT Xconnect No. 359455 1.
For fully automatic determination of component zero-points, measurement of lengths, bore centres, reference edges and axial alignment. Manual operation without wireless transmission (without XCONNECT) is also possible.
For fully automatic determination of component zero-points, measurement of lengths, bore centres, reference edges and axial alignment. Manual operation without wireless transmission (without XCONNECT) is also possible.
Supplied with:
Supplied with battery CR2 and contact point No. 359505 4.
Optional extras:
XCONNECT data memory stick No. 359455 1.
Note:
Suitable contact point No. 359505 4. The item is permanently installed on a machine and can only be used on another machine through another cycle request.
Warning:
Intended use
Reasonably foreseeable misuse
- Use only when it is technically in good condition and safe to operate.
- For work in industrial environments.
- Use only on a flat and clean base.
- Use only when correctly assembled and with safety devices and guards on the machine fully operational.
- Use only original spare parts and wearing parts.
Reasonably foreseeable misuse
- Do not use in explosion hazard areas.
- Not for use in areas where high concentrations of dust, flammable gases, vapours or solvents are present.
- Do not subject it to blows, impacts or heavy loads.
- Do not make any unauthorised modifications.