{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Slot drill HSS-Co8, TiAlN, ⌀ e8 DC: 6mm
Article no.: 183865
Catalog no.: 191070
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | yes | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Interface coding | ZYL00601005 | |
| Shank diameter DS | 6 mm | |
| Shank type | HB | |
| Tool material | HSS-E | |
| Cutting media, manufacturer’s designation | HSS-CO8 TIALN | |
| Coating | TiAlN | |
| Cutter diameter Dc | 6 mm | |
| Tolerance of cutter diameter | tolerance class ISO | |
| Tolerance class | e8 | |
| Cutting edge length Lc | 8 mm | |
| ISO milling cutter type | slot drill | |
| Relief angle | 0 degrees | |
| Side rake angle | 0 degrees | |
| Number of effective cutters (peripheral side) Z | 2 | |
| Corner / edge | 1 | |
| Corner chamfer width | 0 mm | |
| Corner chamfer angle | 90 degrees | |
| Spacing of the cutters | the same | |
| Direction of infeed | horizontal, oblique and vertical | |
| Interface | joint 1 | |
| Gauge length A | 16 mm | |
| Overall length L | 52 mm | |
| Weight | 10 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid steel | |
| Standard | DIN 327 D | |
| Machining method | slot drilling (keyway cutting) (FNB) | |
| Colour ring | without | |
| Type of product | woodruff keyseating milling cutter, T-slot milling cutter | |
| Content | single part | |
| Correction factor fz | 1.25 | |
| Cutting depth min. | 0.01 mm | |
| Max. cutting depth L2 | 6 mm; 8 mm |
Identification & Classification
| Article number | 183865 | |
| Catalog number | 191070 | |
| EAN / GTIN | 4045197099792 | |
| Manufacturer number | 191070 6 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
78
P
55
P
55
M
17
M
14
K
46
N
92
Description
Version:
Centre cutting edge geometry for plunging.
Economy version.
Economy version.
Application:
For milling keyways (slots) or pockets from the centre of the component.