{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Stationary machine vice, Type: 150M
Article no.: 183933
Catalog no.: 362175
Article code:
Product details
Technical Data
| Clamping range quick adjustment | no | |
| Base body length | 427 mm | |
| Base body width | 186 mm | |
| Base body height | 73 mm | |
| Jaw width | 151 mm | |
| Jaw height | 44.5 mm | |
| Interchangeable jaws | yes | |
| Clamping force selection | maximum clamping force | |
| Clamping force | 36 kN | |
| With bore | yes | |
| Hole spacing | 98.4 mm | |
| Pitch | 101.6 | |
| With width across flats | yes | |
| Width across flats | 19 mm | |
| Version | mechanical | |
| Material | cast iron | |
| Surface | hardened | |
| Accuracy | 0.012 mm | |
| Type of product | machine vice |
Identification & Classification
| Article number | 183933 | |
| Catalog number | 362175 | |
| EAN / GTIN | 4062406384081 | |
| Manufacturer number | 362175 150M | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
Sturdy base body of cast iron, slides and base area hardened. Cleaning holes in the base body for good flow of chips. Less component lift-off thanks to special transfer of force in the mobile jaw.
Application:
Versatile clamping unit for machining centres.
Supplied with:
Incl. 2 pcs. top jaws, 1 pc. front jaws No. 362181, 1 pc. front jaws No. 362182 and 1 pc. hand crank.
Optional extras:
Front jaws No. 362177 – 362185, crank No. 362190, spare-parts set No. 362199. Mounted with Tee bolts No. 375300 and aligned with tenons No. 375365.
Note:
Metric version – screws and threads in metric design, drive hexagon = AF 19 mm (150M), drive hexagon = AF 14 mm (100M).
Warning:
Intended use
- Use only when correctly assembled and with safety devices and guards on the machine fully operational.
- Use only on a flat and clean base.
- For work in industrial environments.
- Use only in enclosed spaces.
- Use for clamping workpieces.
- For clamping workpieces in the blank or partially machined state.
- Do not use in explosion hazard areas.
- Not for use in areas where high concentrations of dust, flammable gases, vapours or solvents are present.
- Do not mount components not in accordance with the specification.
- Do not make any unauthorised modifications.
- Use only original spare parts and wearing parts.
- Do not operate outside of the operating parameters.