{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Solid carbide engraving cutter 60°, uncoated, ⌀ h6 DC: 3mm
Article no.: 189584
Catalog no.: 208040
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Vorschub pro Zahn fz | 0.01 mm | |
| Wet minimum | suitable only under restricted conditions | |
| Max. cutting depth, Side milling | 15 mm | |
| Wet maximum | suitable only under restricted conditions | |
| Eingriffsbreite max. ae | 1,0×D | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Interface coding | ZYL00300105 | |
| Holder shape | plain shank | |
| Holder version | metric | |
| Holder size, metric | 3 mm | |
| Dry machining | suitable | |
| Holder tolerance class | h6 | |
| Shank diameter DS | 3 mm | |
| Shank type | HA | |
| Air | suitable | |
| Cooling lubricant | yes | |
| Manufacturer’s designation | VHM-Gravierfräser 60° | |
| Tool material | solid carbide | |
| Machining group | K (cast iron); M (stainless steel); N (non-ferrous metals); P (steel) | |
| Cutter diameter Dc | 3 mm | |
| Tolerance of cutter diameter | tolerance class ISO | |
| Tolerance class | h6 | |
| Cutting edge length Lc | 15 mm | |
| Number of effective cutters (end face) Z | 1 | |
| Corner / edge | 1 | |
| Corner version | as chamfer | |
| Corner chamfer angle | 60 degrees | |
| Profile angle | 60 degrees | |
| Number of clamping slots | 1 | |
| Tool application group | N | |
| Cutting media, manufacturer’s designation | VHM | |
| Vorschub pro Zahn in | steel < 900 N/mm2 | |
| Coating | uncoated | |
| Interface | joint 1 | |
| Tolerance class | h6 | |
| Overall length L | 50 mm | |
| Weight | 5 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Standard | Werksnorm | |
| Machining method | profile milling (FPR) | |
| Colour ring | without | |
| Type of product | stylus | |
| Content | single part | |
| Correction factor fz | 1.25 | |
| Cutting depth min. | 0.01 mm | |
| Cutting depth in use | Full slot milling; Side milling |
Identification & Classification
| Article number | 189584 | |
| Catalog number | 208040 | |
| EAN / GTIN | 4045197129055 | |
| Manufacturer number | 208040 3 | |
| Article class | 11X | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
180
N
140
N
105
P
70
P
60
P
55
P
35
M
40
K
55
Description
Application:
For engraving contours.
Note:
fz for ae = 1.0×D