{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Fastening screw for hard and soft top jaws, for chuck type: 315
Article no.: 191090
Catalog no.: 313420
Article code:
Product details
Technical Data
| Nominal length L | 35 mm | |
| Thread size d1 | M12×1,5 | |
| Thread pitch P | 1.5 mm | |
| Content | single part | |
| Type of product | non-specific screw | |
| Thread type | metric ISO fine thread |
Identification & Classification
| Article number | 191090 | |
| Catalog number | 313420 | |
| EAN / GTIN | 4019208056401 | |
| Manufacturer number | 202402 | |
| Manufacturer/responsible person | Röhm GmbH, Heinrich-Röhm-Straße 50, 89567 Sontheim/BRZ, Germany, www.roehm.biz |
Description
Application:
As the jaws can be changed or adjusted to the required diameter in just a few seconds, it is useful to have several jaw sets on hand ready for use at the machine. This minimises set-up times. The jaw units consist for example of several sets of base jaws with soft top jaws, which can be machined out to the required diameters. This rationalisation method is not only necessary for NC machines but also important for every lathe type.