{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Contour measuring instrument LC-10 LC-10
Article no.: 2000456
Catalog no.: 499322
Article code:
Click to enlarge image
Click to enlarge image
Including manual Y-table.
Click to enlarge image
Optional top-down module.
Click to enlarge image
Optional top-down module.
Click to enlarge image
Optional roughness software.
Product details
Technical Data
| Manufacturer’s designation | LC-10 | |
| Power supply | mains-powered | |
| Measuring range X-axis | 225 mm | |
| Measuring range Z-axis | 225 mm | |
| Base plate | yes | |
| Footprint length | 950 mm | |
| Baseplate width | 490 mm | |
| Measurement system X | incremental | |
| Measurement system Z | incremental | |
| Straightness (+L/100) | 1.5 µm | |
| Min. measuring speed | 0.1 | |
| Max. measuring speed | 2 | |
| Control of X and Z axis | 0.02 µm | |
| Type of product | contour measuring tool | |
| Overall length | 950 mm | |
| Overall width | 490 mm | |
| Overall height | 760 mm | |
| Weight | 150 kg | |
| Test certificate | yes | |
| Min. measuring force | 10 N | |
| Max. measuring force | 0.15 N | |
| Resolution | 0.03 µm | |
| Interface | PC link | |
| With display | yes | |
| Display type | TFT | |
| Storage of measured values | yes |
Identification & Classification
| Article number | 2000456 | |
| Catalog number | 499322 | |
| EAN / GTIN | 2000001054543 | |
| Manufacturer number | 101-206-001 + 101-204-004 | |
| Article class | 40N | |
| Manufacturer/responsible person | optacom GmbH & Co. KG, Dürrfelder Straße 18, 97508 Obereuerheim, Germany |
Description
Version:
The entry-level system for the whole variety of contour measurement tasks. Very good 30 nm resolution directly at the probe tip. Body of high-tensile aerospace-grade aluminium on a solid granite base.
- High-precision linear axes with integral drive
- Non-contact linear incremental measuring system for absolute freedom from wear
- Axis guide and head of a single workpiece, integrally machined
- X-axis permanently fixed to the Z-axis with absolutely zero play
- Contour and roughness measured in a single pass (pre-requirement: roughness module)
Supplied with:
Optacom LC-10 measuring machine, industrial PC with TFT monitor, mouse and keyboard, Windows operating system, optacom contour software, calibration standard with certificate (for machine calibration), a quick-change lock and a contact point 20.5 mm.
Including manual Y-table
Including manual Y-table
Optional extras:
- Top/down module
- Roughness