{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Wedge anchor steel zinc plated blue FAZ II Plus 8/100
Article no.: 2005750
Catalog no.: 3310
Article code:
Product details
Technical Data
| Number of nuts | 1 | |
| Material | Galvanised steel | |
| Fixing with expansion tool | No | |
| Drive | Hexagonal | |
| Suitable for cracked concrete | Yes | |
| hef | 45 mm | |
| Fire protection relevant | Yes | |
| hef | 45 / 35 mm | |
| M | M8 | |
| l | 165 mm | |
| max. usable length handle, std./handle, min. | 100 / 110 mm | |
| Anchorage depth (reduced) | 35 mm | |
| Fire resistance class | R120 | |
| t fix | 100 mm | |
| d0 | 8 mm | |
| SW | 13 mm | |
| Seismic approval | C1 | |
| h2 | 155 mm | |
| Disc | 16 x 1.6 mm | |
| Suitable for non-cracked concrete | Yes | |
| Professional / DIY | Profi | |
| Environment | Inside | |
| With collar | No | |
| Number of washers | 1 | |
| Surface protection | Galvanic/electrolytic zinc plated | |
| Max. thickness of the attachment | 100 mm | |
| M x ls | M8 x 128 mm | |
| max. fixture thickness (reduced) | 110 mm |
Packaging units
| 1 Pack | 25 Pieces | |
| 1 Pallet | 4000 Pieces |
Identification & Classification
| Article number | 2005750 | |
| Catalog number | 3310 | |
| EAN / GTIN | 4048962462029 | |
| Manufacturer number | 564577 | |
| Article class | RMC |
Description
Advantage:
- Quick and easier assembly without the need for drill hole cleaning (M8-M24).
- Numerous approval certificates for different substrate materials (concrete C12/15-C80/95, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use.
- With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required.
- The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24.
- The fast installation process of the FAZ II Plus provides an efficient fixing solution for dynamic applications with low load cycles (M16-24) with an immediately loadable fixing point.
- The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire.
- The FAZ II Plus allows the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the filling disc FFD at installation.
Application Area:
- Steel constructions
- Guard rails
- Consoles
- Ladders
- Cable trays
- Machines
- Staircases
- Façades
- Timber constructions
Approved for:
- Concrete C20/25 to C50/60, cracked and non-cracked
- Concrete C12/15 (classification available)
- Concrete C80/95 (classification available)
- Steel fiber concrete (classification available)
- Solid sand-lime brick (classification available)
Application Notes:
- The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread.
- When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall.
- The anchor is set in line with the approval once the preset installation torque is achieved.
- In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools.