{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Wedge anchor stainless steel 1.4529 FAZ II Plus HCR
Article no.: 2006534
Catalog no.: 3312
Article code:
Product details
Technical Data
| Number of nuts | 1 | |
| Material | Highly corrosion-resistant steel | |
| Fixing with expansion tool | No | |
| Suitable for cracked concrete | Yes | |
| Drive | Hexagonal | |
| hef | 45 mm | |
| M | M8 | |
| hef | 45 / 35 mm | |
| Fire protection relevant | Yes | |
| Packing | Folding box | |
| l | 75 mm | |
| max. usable length handle, std./handle, min. | 10 / 20 mm | |
| Anchorage depth (reduced) | 35 mm | |
| Fire resistance class | R120 | |
| d0 | 8 mm | |
| t fix | 10 mm | |
| SW | 13 mm | |
| Seismic approval | C1 | |
| h2 | 65 mm | |
| Material grade | Other | |
| Disc | 16 x 1.6 mm | |
| Suitable for non-cracked concrete | Yes | |
| Professional / DIY | Profi | |
| With collar | No | |
| Environment | Highly corrosive | |
| Number of washers | 1 | |
| Surface protection | Untreated | |
| Max. thickness of the attachment | 10 mm | |
| M x ls | M8 x 38 mm | |
| max. fixture thickness (reduced) | 20 mm |
Identification & Classification
| Article number | 2006534 | |
| Catalog number | 3312 | |
| EAN / GTIN | 4048962462609 | |
| Manufacturer number | 564635 | |
| Article class | RMM |
Description
Advantage:
- Quick and easier assembly without the need for drill hole cleaning (M8-M24).
- Numerous approval certificates for different substrate materials (concrete C12/15-C80/95, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use.
- With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required.
- The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire.
- An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16).
- The FAZ II Plus allows the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the filling disc FFD at installation.
- The variable anchorage depths allow a millimetre-accurate adjustment to the loads.
Application Area:
- Steel constructions
- Guard rails
- Consoles
- Tunnels
- Swimming pools
- Lifts
- Lifting platforms
- Conveyor belts
- Pumps
- Ladders
- Cable trays
- Machines
- Staircases
- Façades
- Timber constructions
Approved for:
- Concrete C20/25 to C50/60, cracked and non-cracked
- Concrete C12/15 (classification available)
- Concrete C80/95 (classification available)
- Steel fiber concrete (classification available)
- Solid sand-lime brick (classification available)
Application Notes:
- The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread.
- When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall.
- The anchor is set in line with the approval once the preset installation torque is achieved.
- In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools.
- In case of seismic demands, the annular gap can be filled using the filling disc FFD.
- For dynamic loads, an additional "dynamic set" is used, which is filled with injection mortar (compressive strength ≥ 50N/mm² e.g.: FIS V Plus, FIS EM Plus, FIS HB or FIS SB) after installation.