{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Wedge anchor with large washer Galvanized steel FAZ II Plus GS 12/80
Article no.: 2006555
Catalog no.: 3313
Article code:
Product details
Technical Data
| Fire resistance class | R120 | |
| t fix | 80 mm | |
| d0 | 12 mm | |
| SW | 19 mm | |
| Number of nuts | 1 | |
| Seismic approval | C1 / C2 | |
| Material | Galvanised steel | |
| h2 | 170 mm | |
| Fixing with expansion tool | No | |
| Drive | Hexagonal | |
| hef | 70 mm | |
| hef | 70 / 50 mm | |
| M | M12 | |
| Disc | 44 x 4 mm | |
| Environment | Inside | |
| With collar | No | |
| Number of washers | 1 | |
| Surface protection | Galvanic/electrolytic zinc plated | |
| Max. thickness of the attachment | 80 mm | |
| l | 180 mm | |
| M x ls | M12 x 131 mm | |
| max. usable length handle, std./handle, min. | 80 / 100 mm | |
| Anchorage depth (reduced) | 50 mm | |
| max. fixture thickness (reduced) | 100 mm |
Packaging units
| 1 Pack | 20 Pieces | |
| 1 Pallet | 1360 Pieces |
Identification & Classification
| Article number | 2006555 | |
| Catalog number | 3313 | |
| EAN / GTIN | 4048962462777 | |
| Manufacturer number | 564652 | |
| Article class | RMC |
Description
Advantage:
- The FAZ II Plus GS are suitable for fixing steel fixtures with long holes thanks to the special washer, and help to reduce installation effort.
- The significantly larger outer diameter of the washers for FAZ II Plus 16 GS ensures a larger supporting surface, and as such allows for use in wood construction.
- Quick and easier assembly without the need for drill hole cleaning (M8-M24).
- Numerous approval certificates for different substrate materials (concrete C12/15-C80/95, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use.
- With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required.
- The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire.
- An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16).
- The variable anchorage depths allow a millimetre-accurate adjustment to the loads.
Application Area:
- Anchor plates with slotted holes
- Façade sub-structures with slotted holes
- Timber constructions
- Tension anchor
- Anchoring of wooden beams
Approved for:
- Beton C20/25 bis C50/60, gerissen und ungerissen
- Concrete C12/15 (classification available)
- Concrete C80/95 (classification available)
- Steel fiber concrete (classification available)
- Solid sand-lime brick (classification available)
Application Notes:
- The FAZ II Plus GS is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions.