{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Wedge anchor steel short galvanized FAZ II Plus 12/20 K
Article no.: 2006573
Catalog no.: 3315
Article code:
Product details
Technical Data
| Number of nuts | 1 | |
| Material | Galvanised steel | |
| Suitable for hollow-core concrete slab | No | |
| Fixing with expansion tool | No | |
| Drive | Hexagonal | |
| Suitable for cracked concrete | Yes | |
| Fire protection relevant | Yes | |
| M | M12 | |
| l | 100 mm | |
| Anchorage depth (reduced) | 50 mm | |
| Fire resistance class | R120 | |
| d0 | 12 mm | |
| SW | 19 mm | |
| Seismic approval | C1 / C2 | |
| h2 | 90 mm | |
| Material grade | 8.8 | |
| Disc | 18 x 2 mm | |
| Suitable for non-cracked concrete | Yes | |
| Professional / DIY | Profi | |
| Environment | Inside | |
| With collar | No | |
| Number of washers | 1 | |
| Surface protection | Galvanic/electrolytic zinc plated | |
| Anchoring depth | 50 mm | |
| Max. thickness of the attachment | 20 mm | |
| M x ls | M12 x 51 mm | |
| max. fixture thickness (reduced) | 20 mm |
Packaging units
| 1 Pack | 20 Pieces | |
| 1 Pallet | 4160 Pieces |
Identification & Classification
| Article number | 2006573 | |
| Catalog number | 3315 | |
| EAN / GTIN | 4048962463002 | |
| Manufacturer number | 564675 | |
| Article class | RMC |
Description
Advantage:
- Quick and easier assembly without the need for drill hole cleaning (M8-M24).
- Numerous approval certificates for different substrate materials (concrete C12/15-C80/95, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use.
- With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required.
- The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire.
- The variable anchorage depths allow a millimetre-accurate adjustment to the loads.
- The FAZ II Plus allows the absorption of high seismic loads of performance category C1 with and without the use of the filling disc FFD at installation.
Application Area:
- Steel constructions
- Guard rails
- Consoles
- Ladders
- Cable trays
- Machines
- Staircases
- Façades
- Timber constructions
Approved for:
- Concrete C20/25 to C50/60, cracked and non-cracked
- Concrete C12/15 (classification available)
- Concrete C80/95 (classification available)
- Steel fiber concrete (classification available)
- Solid sand-lime brick (classification available)
Application Notes:
- The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread.
- When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall.
- The anchor is set in line with the approval once the preset installation torque is achieved.
- In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools.
- In case of seismic demands, the annular gap can be filled using the filling disc FFD.