{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Circular saw blade fine, uncoated, ⌀×thickness: 225X2/Kmm
Article no.: 2018510
Catalog no.: 177055
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Cutter diameter | 225 mm | |
| Diameter of mounting hole | 32 mm | |
| Cutting width | 2 mm | |
| ISO milling cutter type | Shell end mills | |
| Tooth form | Hz | |
| Number of cutters (peripheral side) | 180 | |
| Tooth pitch | 4 mm; 6 mm; 7 mm; 4 mm | |
| Corner version | sharp-edged | |
| Tool material | HSS | |
| Coating | vaporised | |
| Cutting direction | right-hand cutting | |
| Standard | DIN 1840 | |
| Machining method | parting-off milling | |
| Type of product | circular saw blade |
Identification & Classification
| Article number | 2018510 | |
| Catalog number | 177055 | |
| EAN / GTIN | 4067263046523 | |
| Manufacturer number | 177055 225X2/K | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
800
N
600
P
37
P
22
P
20
K
27
N
400
Description
Version:
Precise format and good quality for a competitive price. Vaporised surface protects against edge build-up.
Application:
On low speed machines (approx. 50 rpm).
Pitch t: (tooth form).
Pitch t: (tooth form).
- 4 mm (BW) − For profiles and pipes with 1.0 − 1.5 mm wall thickness.
- 5 / 6 mm (HZ) − For medium profiles, tubes and solid material with 1.5 − 20 mm wall thickness or cross−section.
- 7 / 8 mm (HZ) − For thick profiles and solid materials up to approx. 50 mm wall thickness or cross-section.
- 10 − 16 mm (HZ) − For extra thick cross-sections and solid material more than 50 mm.
Note:
- For stainless steels (such as V2A) the correct cutting speed and lubrication is crucial (see information in the machining handbook, No. 110020).
- The concentricity and axial run-out values are considerably better than the figures according to DIN 1840, in some cases by up to 50 %.
Successor product to No. 177050.