{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for turning CCGT 060201, for finish machining
Article no.: 2018535
Catalog no.: 260090
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | CCGT 060201 | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Base form | rhomboidal | |
| Wide insert | 6.35 mm | |
| Thickness of the insert | 2.38 mm | |
| Length of cutting insert | 6.5 mm | |
| Insert version | neutral | |
| Length of cutting edge | 6.5 mm | |
| Height of cutting edge | 2.38 mm | |
| Diameter of the cutting insert | 6.35 mm | |
| Corner radius | 0.1 mm | |
| Corner angle | 80 degrees | |
| Rake face chamfer width | 0 mm | |
| Rake face chamfer angle | 0 degrees | |
| Rake angle | 0 degrees | |
| Setting angle | 0 degrees | |
| Normal clearance angle (main cutting edge) | 7 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 7 degrees | |
| Normal clearance angle (flat cutting edge) | 0 degrees | |
| ISO-Code | CCGT 060201 | |
| Attachment hole diameter | 3 mm | |
| Type of chip breaker | MFP-SK | |
| Tool material | Carbide | |
| Standard designation for cutting medium, 2nd Priority | HC-P | |
| Machining group | M (stainless steel); N (non-ferrous metals); P (steel) | |
| Tool application group | Drehen | |
| Cutting media, manufacturer’s designation | PR1725 | |
| Coating | Megacoat Nano | |
| Grade | PR1725 | |
| Insert thickness | 2.38 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | CCGT 060201 | |
| Interface coding for insert according to ISO TS 13399-60 | CC0602013N | |
| Insert designation | CCGT 060201 | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 2 pcs. | |
| Direction of action | neutral | |
| Suitable for material | stainless steel (M); steel (P) | |
| Tolerance Class | G | |
| Machining method | grooving and parting off (EEA) | |
| Finishing / roughing assignment | Finishing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | sharp-edged (F) | |
| Cutting conditions | interrupted | |
| Number of potential uses | 2 pcs. | |
| Weight | 18 g | |
| Content | 1 pcs. |
Identification & Classification
| Article number | 2018535 | |
| Catalog number | 260090 | |
| EAN / GTIN | 4960664923335 | |
| Manufacturer number | CCGT060201MFP-SKS | |
| Manufacturer/responsible person | KYOCERA UNIMERCO Tooling GmbH, Hammfelddamm 6, 41460 Neuss, Germany, www.kyocera-unimerco.de |
Application Table
P
P
P
P
P
M
M
