{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
PNEU 1205 ANER-GL, PR1510, Type: GG
Article no.: 2018602
Catalog no.: 222818
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | PNEU 1205 ANER-GL | |
| Dry machining | suitable | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Base form | pentagonal | |
| Wide insert B | 12 mm | |
| Thickness of the insert S | 5.55 mm | |
| Length of cutting insert L | 17.51 mm | |
| Insert version | right-hand | |
| Length of cutting edge l | 12 mm | |
| Height of cutting edge | 5.55 mm | |
| Diameter of the cutting insert d | 17.03 mm | |
| Corner radius R | 0.8 mm | |
| Corner chamfer length C | 2 mm | |
| Corner chamfer angle | 27.4 degrees | |
| Corner chamfer width | 2.4 mm | |
| Corner angle | 108 degrees | |
| Rake face chamfer width C | 0 mm | |
| Rake face chamfer angle | 0 degrees | |
| Rake angle | 0 degrees | |
| Normal clearance angle (main cutting edge) | 0 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 0 degrees | |
| Radius of main cutting edge R | 2.7 mm | |
| Cutting conditions | continuous | |
| ISO-Code | PNEU 1205 ANER-GL | |
| Attachment hole diameter | 6.2 mm | |
| Tool material | Carbide | |
| Machining group | K (cast iron); M (stainless steel); P (steel); S (difficult-to-machine materials) | |
| Tool application group | PM120503R | |
| Cutting media, manufacturer’s designation | PR1510 | |
| Coating | Megacoat Nano | |
| Grade | PR1510 | |
| Insert thickness T | 5.55 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | PNEU 1205 ANER-GL | |
| Interface coding for insert according to ISO TS 13399-60 | PNEU1205-ANER | |
| Insert designation | PNEU1205-ANER | |
| Type of product | cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 10 pcs. | |
| Direction of action | right-hand | |
| Suitable for material | cast iron (K); heat-resistant super-alloys (S); stainless steel (M); steel (P) | |
| Tolerance Class | E | |
| Machining method | face milling (FPL) | |
| Finishing / roughing assignment | finishing; roughing | |
| Type of fastening | hole | |
| Chip breaker | yes | |
| Cutter version | rounded (E) | |
| Cutting conditions | continuous | |
| Number of potential uses | 10 pcs. | |
| Weight | 15 g | |
| Content | 1 pcs. | |
| Correction factor fz | 2.5 |
Identification & Classification
| Article number | 2018602 | |
| Catalog number | 222818 | |
| EAN / GTIN | 4960664671175 | |
| Manufacturer number | PNEU1205-ANER-GLPR1510 | |
| Manufacturer/responsible person | KYOCERA UNIMERCO Tooling GmbH, Hammfelddamm 6, 41460 Neuss, Germany, www.kyocera-unimerco.de |
Application Table
K
180
Description
Note:
Standard application values for ae = 0.3×D.