{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Shrink-fit chuck, HSK-E 50, Clamping ⌀ D1: 3mm
Article no.: 2019152
Catalog no.: 308035
Article code:
Product details
Technical Data
| Through-coolant | yes | |
| Entry of cooling lubricant | with cooling lubricant entry, axially concentric | |
| Escape of cooling lubricant | with cooling lubricant exit, axially concentric | |
| Cooling lubricant | yes | |
| Holder type | hollow shank taper HSK | |
| Holder shape | with central cooling lubricant transfer | |
| Holder version | dimensionless nominal size with cooling | |
| Holder size, no dimensions | 50 | |
| Type of mounting | hole (internal mounting) | |
| Max. clamping diameter D1 | 3 mm | |
| Gauge length A | 60 mm | |
| Outer diameter on the tool side D | 17 mm | |
| Body length, tool-end L1 | 34 mm | |
| Taper angle | 4.5 degrees | |
| Min. tool clamping length L3 min | 14 mm | |
| Max. tool clamping length L3 | 14 mm | |
| Max. speed | 25’000 min-1 | |
| Concentricity | 3 µm | |
| Balance quality G at rotational speed | g 2.5 at 25,000 rpm | |
| Machining strategy | HSC | |
| Vibration damping | no | |
| Tool pull-out protection | no | |
| Pendular compensation | no | |
| Including length adjustment backstop screw | yes | |
| Adjustment travel V | 10 mm | |
| Incl. RFID data carrier | no | |
| With cooling channel bore | yes | |
| Interface | joint 1; joint 2 | |
| Type of product | shrink-fit chuck | |
| Overall length L | 85 mm | |
| Overall height H1 | 17 mm | |
| Overall width B1 | 17 mm | |
| Standard | DIN 69893; ISO 12164-1 | |
| Shape | E | |
| With hole for RFID data carrier | yes | |
| Through-coolant available | yes | |
| Material | heat-treatable steel | |
| Surface treatment | hardened | |
| Content | 1 pcs. |
Identification & Classification
| Article number | 2019152 | |
| Catalog number | 308035 | |
| EAN / GTIN | 4067263014553 | |
| Manufacturer number | 308035 3 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
- High-temperature steel.
- Integral tool length adjustment, adjustment track 10 mm.
- Sizes 3 − 5 for carbide, from size 6 for HSS and carbide.
- All shanks hard turned (for smooth running!).
- With RFID/Balluffchip bore.
GARANT: − HSK mating faces machined.
Application:
For holding end mills and drills with parallel shank to h6 tolerance. Suitable for inductive, contact and hot air shrink-fitting units.