{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Burr GARANT Master Alu − very rough (non-ferrous / aluminium), Carbide DLC, Type: AS1020
Article no.: 2019660
Catalog no.: 547600
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Cooling lubricant | yes | |
| Wet minimum | suitable only under restricted conditions | |
| Series | GARANT Master Alu | |
| Wet maximum | suitable | |
| Manufacturer’s designation | Frässtift GARANT Master Alu − sehr grob (NE / Alu), HM DLC, Typ: AS1020 | |
| Interface position | on the machine | |
| Holder type | Plain shank | |
| Holder version | metric | |
| Holder size, metric | 6 mm | |
| Dry machining | suitable | |
| Shank diameter DS | 6 mm | |
| Shank length LS | 40 mm | |
| Oil | suitable | |
| Air | suitable | |
| ESD protected area (EPA) | no | |
| Tool material | Carbide | |
| Machining group | N (non-ferrous metals) | |
| Coating | DLC | |
| Cutter diameter Dc | 10 mm | |
| Cutting edge length Lc | 20 mm | |
| Head length L3 | 20 mm | |
| Burr, type of end face | with end cut | |
| Twist direction | right-hand | |
| Burr shape | cylindrical burr | |
| Spacing of the cutters | the same | |
| Type of cut | single toothing | |
| Toothing grit designation | very coarse | |
| Interface | joint 1 | |
| Usable length L1 | 20 mm | |
| Overall length L | 60 mm | |
| Functional length | 20 mm | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Standard | DIN 8033 | |
| Machining method | profile milling | |
| Colour ring | without | |
| Type of product | burr |
Identification & Classification
| Article number | 2019660 | |
| Catalog number | 547600 | |
| EAN / GTIN | 4067263736417 | |
| Manufacturer number | 547600 AS1020 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
Description
Version:
Cylindrical shape (ZYAS), with end cut.
Application:
Optimised for machining hard and soft aluminum alloys, plastics, bronze and non-ferrous metals. Suitable for both manual and industrial robots. For deburring, edge breaking, cleaning, weld and surface preparation.
Note:
Materials with poor heat conductivity; reduce speed to avoid overheating of the burr and smearing.