{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Burr, coated GARANT Master Cast – coarse, AlTiSiN, Type: C1020
Article no.: 2019811
Catalog no.: 547700
Article code:
Product details
Technical Data
| Series | GARANT Master Cast | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Shank diameter DS | 6 mm | |
| Tool material | solid carbide | |
| Machining group | K (cast iron); P (steel); S (difficult-to-machine materials) | |
| Coating | AlTiN-Si | |
| Cutter diameter Dc | 10 mm | |
| Head length L3 | 20 mm | |
| Burr shape | cylindrical burr with radius end | |
| Toothing grit designation | coarse | |
| Interface | joint 1 | |
| Usable length L1 | 20 mm | |
| Overall length L | 60 mm | |
| Tool version | solid carbide | |
| Type of product | burr |
Identification & Classification
| Article number | 2019811 | |
| Catalog number | 547700 | |
| EAN / GTIN | 4067263736639 | |
| Manufacturer number | 547700 C1020 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
Description
Version:
The newly developed innovative tooth geometry permits a very high metal removal rate and at the same time smooth running and good guidance. No chip adhesion and outstanding surface results.
Shank ⌀ 6mm.
Suitable for use for roughing and for finishing. With high-performance coating for longer tool life, less heat input and reduced chip adhesion.
GARANT burrs are manufactured from high performance carbide grades with high wear resistance and maximum cutting edge strength, using only the latest CNC machines. Steel shanks are used when the head diameter is larger than the shank diameter, otherwise they are made from solid carbide.
Shank ⌀ 6mm.
Suitable for use for roughing and for finishing. With high-performance coating for longer tool life, less heat input and reduced chip adhesion.
GARANT burrs are manufactured from high performance carbide grades with high wear resistance and maximum cutting edge strength, using only the latest CNC machines. Steel shanks are used when the head diameter is larger than the shank diameter, otherwise they are made from solid carbide.
- High rate of material removal.
- Smooth running.
- High-performance coating for low thermal stress, longer tool life, and improved chip evacuation.
- State-of-the-art substrate optimised for cast steel materials.
- Maximum tool life.
Application:
Optimised for machining cast iron, steel, cast steel, tool steel and soft titanium alloys.
Optimised for machining hard and brittle cast materials such as cast iron, steel and cast steel, tempered steel and tool steel. Suitable for both manual use and industrial robots. For deburring, edge breaking, cleaning, weld and surface preparation.
Optimised for machining hard and brittle cast materials such as cast iron, steel and cast steel, tempered steel and tool steel. Suitable for both manual use and industrial robots. For deburring, edge breaking, cleaning, weld and surface preparation.
Note:
Materials with poor heat conductivity; reduce speed to avoid overheating of the burr and smearing.